At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Here is the wiring schematic.
Constant 12V+
Orange
Switched 12V+
Yellow
Ground
Black
Illumination
Gray
Dimmer
Brown
Antenna
Right Window Trim
Front Speakers
6 1/2" Doors
Left Front (+)
Tan
Left Front (-)
Gray
Right Front (+)
Light Green
Right Front (-)
Dark Green
Rear Speakers
4" x 6" Side Pillar
Left Rear (+)
Brown
Left Rear (-)
Yellow
Right Rear (+)
Dark Blue
Right Rear (-)
Light Blue
And you will need a Wire harness... Metra #GMRC-LAN-01
And a mounting Kit Metra #99-3305
And antenna adapter Metra #40-cr10
This is for the basic radio... if you have upgrade NAV/Onstar/Premium sound.... there are different wiring harnesses available.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the transfer case control module is located behind the left side of dash behind the headlight switch, you will need to remove the speedo trim around speedometer, then pull put the headlight switch. the module is just snaped into place. also keep in mind, the module has to programmed with software for it to work correclty. in other words, the replacement module will have to be programmed after installing
2001 chevy silverado 2500hd battery light flashes intermittently. no problem with battery or alterntor. both tested ok. no problems with starting or running. voltage gauge reads just above 14. no problems with anything except battery light flashes. what could be the problem?
first thing most people forget is to do is turn the radio off. Then push the clock button for 5 seconds or more. Things should start blinking. Then is pretty basic
you need your glove compartment manual that came with truck.you have to reset or recalibrate the radio +cd player before it will play.if you dont have factory manual that came in dash.take it to dealership.
I searched quick and couldn't really find anything on a manual eject button. Flip through the manual a little bit and see what it has about the radio. If all else fails and you aren't worried about possibly breaking the stock cd player, some skinny needle nose pliers should reach in far enough to grip the cd and you can pull it out. But there is a good chance you could break the cd player in doing so.
maybe you are using a burned disc from computer and if its a factory cd player sometimes they dont read it try an original see if it says the same thing.
check power steering fluid. first. if all good . power steering is going. your hydro boost brake system depends on the power steering pump if it goes out your brake go out.
×