2007 Dodge Caliber SXT Sport Hatchback Logo
Renee Lorenz Posted on Nov 15, 2012

On my 07 dodge caliber a lightening bolt appeared between 2 lines and the check engine light came on but everything ran fine. Please advise. Thank you

1 Answer

A

Anonymous

Have a repair shop check for codes every time
any light comes on your dash

Then you know if any systems have a fault & if you
should continue to use it prior to repairs

5 Related Answers

Ottoniel

  • 202 Answers
  • Posted on Jul 24, 2009

SOURCE: The lightening bolt sign next to the brake sign comes on

this light means alternator not working

Ad

Anonymous

  • 83 Answers
  • Posted on Mar 19, 2011

SOURCE: just need to know the

im seeing 13 mm to be the size for those bolts but i would bring a 14mm 15mm 17mm 19mm socket/wrench as well. goodluck

Testimonial: "thank you "

Anonymous

  • 1 Answer
  • Posted on Nov 01, 2009

SOURCE: need instuctions to change tail/break lights on 07 dodge caliber

popohead, if people thought it was easy, they wouldn't be here asking. Your reply is useless.

To remove the pins, look a them closely. Notice that there's two little notches cut into the cup that holds the pin. Use a flathead on each side to leveredge them out a little. If that doesn't work at all, you can use a pair of pliers to firmly grip the head of the pin and pull straight out. Quick firm pull.

Once the first pin comes out, the second pin should easily come out. At that point, firmly grip your taillight housing, and pull straight back: Don't try to wiggle it out, and don't try to lift it to one side or the other like a trunk or door. Just pull it firmly straight back like you would a dresser drawer.

Once it's out, the little wiring harnesses come out of the taillight housing with about a 1/4 turn, and the bulbs just slide straight out of those.

Good luck!

Anonymous

  • 1 Answer
  • Posted on May 13, 2011

SOURCE: 2009 Caliber: light on the dash that as two lines with a lighten...

I have a 2009 Caliber. Lately as I excelarate, this light on the dash that has two lines and looks like lightening bolt comes on and causes the car to not excelarate as it should. The car drives
less than 2 miles an hour when this happens. Even if I push the paddle to the floor, it still rides
very slow. What does this light mean? Please advise.

Anonymous

  • 78 Answers
  • Posted on May 13, 2011

SOURCE: I have a 2009 Caliber

THAT LIGHT MEANS U ARE HAVING ISSUES WITH YOUR THROTTLE BY WIRE SYSTEM. U REALLY NEED TO GET IT TO A MECHANIC ASAP. WOULDNT WANT A SIMILAR INCIDENT LIKE TOYOTA HAD. HOPE I HELPEDU

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Torque spec for maniverter bolts on a 07 dodge caliber rt

The torque specification for the manifold to catalytic converter bolts on a 2007 Dodge Caliber RT with a 2.4L engine is 26 Nm (19 lb-ft). It's important to use a torque wrench to ensure the proper torque is applied to the bolts to avoid over-tightening or under-tightening, which could lead to problems with the exhaust system.
1helpful
1answer

2011 Dodge Caliber, turns over, but won't start. Check engine & red lightening bolt lights are on. Changed plugs. Didn't help. Car has 75 on it, and gas tank is full. Any ideas?

Have the onboard computer checked and extract the code(s) that set the check engine light. There are a number of things that can cause your problem and the code(s) may help narrow it down. Possible items are the crankshaft sensor, the camshaft sensor, and the fuel pump, as well as the onboard computer itself.
0helpful
1answer

07 Dodge Caliber, ETC light

Try replacing the TPS first, then if your light doesn't go off, take it to the dealer.
0helpful
1answer

I've got a 2008 caliber srt4 and a red warning

You need to have the computer scanned. It sounds like you went into limp mode and need to find the source of the fault.
0helpful
1answer

I have a 2009 Caliber which lately has been excelarating improperly. A red light comes on the dash which looks like 2 lightening bolts. What does this mean?

THAT LIGHT MEANS U ARE HAVING ISSUES WITH YOUR THROTTLE BY WIRE SYSTEM. U REALLY NEED TO GET IT TO A MECHANIC ASAP. WOULDNT WANT A SIMILAR INCIDENT LIKE TOYOTA HAD. HOPE I HELPEDU
0helpful
1answer

2001 dodge grand caravan , check engine light p0202 ,i have checked #2 fuel injector and tested all injectors. all injectors tested between 12.6 and 12.8 ohms for all. i have replaced the pcm and it burned...

If the noid light is working, the pcm is good. Why do you say it burned out? I would check ac voltage at each injector with engine running. If #2 has lower voltage than the others, you probably have a bad wire or connector.
7helpful
2answers

2009 Caliber: light on the dash that as two lines with a lighten...

I have a 2009 Caliber. Lately as I excelarate, this light on the dash that has two lines and looks like lightening bolt comes on and causes the car to not excelarate as it should. The car drives
less than 2 miles an hour when this happens. Even if I push the paddle to the floor, it still rides
very slow. What does this light mean? Please advise.
0helpful
1answer

Car won't start

its your alternator my caliber did the same thing and now its out completely...
Not finding what you are looking for?

587 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...