Question about 2004 Toyota Previa
I can't get my hands into the space to pull out the headlight bulb. Is there a trick to getting it out? The space is tiny, and I can not get the leverage to press in the lock button, let alone pull out the cable. Am I doing something wrong?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Replacing a headlight bulb for Toyota Previa. Quite simple. Open the hood. Look for the black plastic coupling or ring on the backside of the headlight. Grasp and turn counterclockwise (i believe it will be about a quarter turn). pull the socket out, then replace the bulb. I believe it is code #9004. Strongly recommend replacing both headlights at the same time.
Posted on Oct 08, 2009
to change passenger side headlight bulb,on 04 plate yaris, remove bulb cover at rear of lamp,take off fuse box,although this only gives you slightly more room,and have someone with small hands,replace bulb,as it is nearly impossible if you have large hands.It is awkward but can be done,EVENTUALLY.
Posted on Feb 08, 2010
Tips for a great answer:
Sep 16, 2013 | 2005 Pontiac Aztek
Open the Galant's hood and locate the headlight cover -- roughly 3-inch wide circular piece of plastic -- behind the headlight bulb intended for replacement. Turn this cover clockwise to unlock it and pull it from the headlight assembly, exposing the headlight socket below it.
Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.
Grab the bulb and pull it from the socket with a slight wiggling motion.
Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.
Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.
Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.
Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed. Close the Galant's hood.
Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe
Close the Galant's hood.
Sep 27, 2012 | 2000 Mitsubishi Galant
Jan 05, 2012 | 2004 Lexus ES 330
May 07, 2011 | 2004 Porsche Cayenne
Dec 25, 2010 | 2004 Cadillac CTS
Oct 08, 2009 | Toyota Previa Cars & Trucks
Jul 16, 2009 | 2004 Volkswagen Jetta
Jan 22, 2009 | 2004 Buick LeSabre
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: