At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I didn't see any instuctions posted for the 6 cylinder Camry.
I changed the front plugs already, do I have to remove the intake to change the back 3 I got the first one out but the other 2 are unreachable.
Help??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.
First, you didn't mention which engine your 1994 Toyota Camry is equipped with. (This is really MUST-KNOW information if you want help with fixing your car.) There is a 3.0L V-6 engine and a 2.2L 4-Cylinder engine. Two TOTALLY different animals! I'll just take the extra time to answer for BOTH of them....
If your Camry is equipped with a 3.0L V-6 engine, You cannot find the spark plug wires because there are none, That engine is equipped with Coil On Plug (COP) ignition. The coils on the left bank (the side of the engine near the radiator) are located under the plastic cover on top of the engine. The coils for the right bank (the side of the engine near the firewall) are located under the upper intake plenum. The plenum MUST be removed to access them. (this is also required to replace the spark plugs.)
If you have the 2.2L 4-cylinder engine, the wires run down the center of the valve cover and the boots go down through the valve cover to the plugs. The other end of the wires attach to the distributor cap at the rear (drivers side) of the engine.
SPARK PLUGS IN THE CYLINDER HEAD.FOLLOW SPARK PLUGS WIRES.THEY WILL LEAD YOU TO THEM.BE SURE CHANGE PLUG WIRES DISTRIBUTOR CAP AND ROTOR IF EQUIPPED.SOME MODELS HAD DISTRIBUTORLESS IGNITION SYSTEM.
4 cylinder diagram 6 cylinder diagram
Loosen the tensioner pulley to remove the belt. It is the one that has a long bolt running through it. Once you remove the old belt, install the new one using the appropriate diagram from the above two links. Readjust the tension using the bolt you loosened to remove the old belt.
This isnt a simple job, its best that a experienced mechanic works on this. You will need special tools for access to the rear head. All sparkplugs in the 1MZFE motor are in the center of the cylinder heads. There are COPs (coil over plugs) atop the sparkplugs, these must be removed first.**With Engine Cold** Front head: 1.remove Coils 2.use 5/8th plug socket and extension w/ratchet turn ratchet counter clockwise till plug is loose. 3. install new plugs (make sure the plugs are properly gapped). Rear Head: Intake manifold must be removed (you need a very large allen wrench for the intake bolts removal). Once this is removed follow the same steps as the front head. Here is some illustrations on the 1MZFE engine: http://www.turboninjas.com/camry/eg2.pdf
Well, if you have the 6 cylinder, there are 3 02 sensors in that car.
One on front manifold, one on back manifold, and one in the center pipe.You changed one, good idea to change the other 2. That is if you have the 6 cyl.
×