I NEED THE FORD KEYPAD ENTRY CODE FOR MY 03 WINDSTAR

SOURCE: CHANGE CODE ON KEYLESS ENTRY SYSTEM FORD EDGE

Yes you can program your own code by inputting the original code then hit the no. 2 button then input your own 5 digit code.

SOURCE: lock code

Take your Van to a Dealership and they will hook it to a computer and tell u what the code is. It didn't cost me a thing when I had it done.

SOURCE: Need factory code for keyless entry pad

To locate the original keypad code, open the passenger/rear door. Pull the on-body rubber weatherstrip out, around the rear side of the door closure. Fold the right/rear seatback down into the locked position to facilitate access to the right/rear seat belt anchor. Carefully pry the upper plastic panel that houses the height adjuster and seat belt anchor off the body taking care not to damage the panel. Now pry the lower panel outward just far enough to enable access to the Vehicle Security Module, where you'll see three electrical connectors plugged into it, coloured green, grey, and blue. On the module will be a series of digits on a label similar to 5L2T-15K602-EA. Beside those digits are five numbers. Those five numbers are the keyless entry keypad code.

SOURCE: keypad keyless entry code missing

Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it

SOURCE: how do i reset my keyless entry keypad code

You can call the ford dealer and give them your VIN and they can give you the code.