Trying 2 find a part form the transmission 2 tha engine
SOURCE: Wiring Diagram 1998 Chevy S-10 starter replacement
The starter has one large cable from the battery positive, and a wire that goes to the solenoid (Part of the starter) that becomes hot when the key ignition is turned to start. This also passes through the neutral safety switch. (So it wont start in gear) Not sure if this is what you need, a little vague.
SOURCE: Engine Wire diagram for S10
go to autozone.com and you can register any type car and they have pretty good prints and service manuals on line. I have an 89 chevy s10 I just rebuilt my motor and overhauled the complete truck just waiting on a new paint job. best of luck
SOURCE: need an engine diagram for a 1995 chevy camaro 6
go to your chevy dealer parts dept and they should be able to print one for you,you'll need your vin #.
SOURCE: replacing serpentine belt on 2000 chevy van need belt diagram
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
I am assuming this "van" is a Chevy Venture?
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/venture/2000_chevrolet_venture_drive_belt_routing_diagram.htm
450 views
Usually answered in minutes!
×