I already replace ignition coil! and still there is no spark in the spark plug
You need to replace the crank position sensor .
thanks sir! but where can i exactly find it? thanks
I am not sure where you are ,but it needs to go to a shop. the crank position sensor is behind the harmonic balancer. I just looked online for a price and there is a recall on the sensor with the timing ring
Sir i have a carshop its my first time to encounter a hyundai getz i dont have any idea about hyundai so i dont know where is that crank position sensor located i just want to know where is it located! If u have a picture where is it located it will be a good help for me! Thanks in advance
×
SOURCE: 2001 hyundai santa fe 6
HI......
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.
OK... I hope this solve your question .
THank you for use fixya.
SOURCE: 2001 Hyundai Santa Fe Ignition coils & EGR Valve
Well I went ahead and took a go at changing the coils, plugs and wires yesterday. It literally took maybe 15 minutes and my hands didn't even get dirty. This is something that the auto place wanted to charge me 650 to do. I spent 200 on parts. I didn't realize the coils were the things sitting on top of the spark plugs. I think my 4 year old could've done it. All I had to do was unbolt the coils detach the wires and then replace. It was too simple.
SOURCE: i washed engine and after a short run engine
Are the plugs in the center of the cylinder head? About 6 inches/ 10 Cm. Look carefully in the plug cylinder ports make sure there is no water next to plugs (this happened to me with a car once)
You can try a rag pushed down (hold a corner) with screwdriver or hairdryer. Otherwise they sell electrical drying spray at parts stores. Good luck!
SOURCE: engine has no spark and crank sensor & coils
ECM uses input from crank sensor to generate spark signals to the coils. Please see my tip at http://www.fixya.com/cars/r6022358-relay_check and let me know if you have questions.
If all fuses good, troubleshoot the EC relay and socket in the engine compartment fuse box.
SOURCE: my 2002 hyundai accent will
are you out of gas? check spark plug wires. .... CHECK FOR FUEL PRESSURE AT FUEL RAIL... no pressure could mean fuel pump is bad or fuel filter blocked and bad... get back to me. Derek
495 views
Usually answered in minutes!
where can i find it?
×