SOURCE: reset
have to speak to a mechanic or volvo they have to hook up there diagnostic computer and they reset it from there
SOURCE: reset prosedures for volvos
Ok when you move the key to start the car. you need the following definitions.
pos 0 equals car off
pos 1 equals acessory position
pos 2 equals run position (NOT START)
pos 3 equals start position
check your drivers information module, and see that your triip display is in trip 1 (T1)
then put your car into position 1. push and HOLD the trip reset meter. WHILE HOLDING the reset button, rotate the key to position 2. Hold the reset button until you see the triangle in the dash flash yellow. Once this starts flashing remove your finger from the reset button. Shut the car off, verify light is out. repeat once if necessary.
SOURCE: how do I reset the maintanance light on my 2008 volvo s60? NOT th
a shop has to do it. or you need toplug it in to the computer and have a program.
SOURCE: CODE 042 ON A VOLVO S60
Brake lights and cruise control are not set properly.
Easy check - are your brake lights coming on with just the usual light touch of the pedal? If not, then the microswitch that senses that your foot is on the brake needs to be adjusted or replaced.
SOURCE: Volvo S60 R will not
Pull the immobilizer fuse.wait one minute then reinstall.This only works 75% of the time.
12,189 views
Usually answered in minutes!
×