Its cold this morning so maybe that has something to do with this problem: When I turned the car on, the headlights did not turn on as they always have and there is a continual beeping tone as if a door is opened. The beeping comes on when the car is put into gear. Otherwise, it doesn't make a sound.
One way to turn off the automatic headlights when the ignition is to apply the parking brake. That dinging sound you hear when you shift into drive is also common with the parking brake applied.
Release the parking brake.
SOURCE: 2000 Cavalier won't start, making fast clicking sound w/ ignition
Low voltage will cause the problem you are having,get the battery charged,and then have the alternator checked for the correct out put,13.65 to 14.25 if it is not in this range give or take a couple of volts,replace it,I would have the battery replaced also,so you won`t have the problem again.Have a shop replace the battery,if you do it yourself,the memory could be erased if certain measures are not performed.
Testimonial: "appreciate the help, will try it in the morning when I can get a battery"
SOURCE: Tail lights and instument panel lights will not come on
Hi ! You have to check for loose or dirty ground wire.
SOURCE: 02 impala trunk opens when i turn car off and battery light comes on occasionally
replace trunk pop button
SOURCE: How do I turn the factory alarm off on my 2006
DIC Vehicle Personalization
Your vehicle has personalization capabilities that allow
you to program certain features to a preferred setting.
All of the features listed may not be available on
your vehicle. Only the features available will be
displayed on your DIC.
The default settings for the features were set when your
vehicle left the factory, but may have been changed
from their default state since then.
click on this link and go to page 3-43 , Hope this helps
http://www.extendedgmwarranty.com/owners-manual/chevrolet/2006-Chevrolet-Cobalt.pdf
SOURCE: 2005 Chevy Equinox P0742 & P0700 problems. My
2005 Equinox's are known for water leakage problems around the cowl and windshield areas. Water leaks in and causes shorts in the main wiring harness and eventual corrosion between the fuse panel's grounding to the floor under the shifter console. Reroute a new ground wire to the body from the fuse panel in the shift console. Find the source of water leak. GM paid to have mine fixed.
477 views
Usually answered in minutes!
×