- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
try this ... make sure the switch is in the 4X4 position ... drive a few feet (20-50) while moving slip the truck into neutral then flip the switch to 2 wheel. if does not work try the same trick in reverse..
The pressure on the drive train must be relaxed for the truck to shift...
you can try jacking on side up as well (two wheels)
the btsi solenoid is probably went out of it, you can remove the shifter boot and pop the linkage off of it and get it to shift had to do this to mine before
if it has automatic lock in hubs only!! start truck, put truck in neutral, push button for 2x2 shift into reverse,back up 5to 10 feet,truck should shift back into 2x2 automatically. shift into drive and the 4x4 light should go off. if you have manual lock hubs you''ll need to unlock those manually on the 2 front wheels.w/truck in neutral and emergency brake on or someone holdling brake inside truck,go to front and rotate the locking hubs to front tire or wheels in centerof hub to free wheel.they will be marked,or should be. if not,then try turning the center of hub switch counter clockwise until it stops turning,then go to passenger side and turn it counter clockwise. thank you for choosing fixya.
you cannot run your truck normally in 4x4 low!!!! the low is designed to go slow slow.try shifting into neutral gear on column tap the high 4x4 then shift to reverse,back up 15feet then shift to drive.it should go into high 4x4 then if you want to go back to 2wheel high shift to neutral tap the 4x4 high until the light goes off,shift to reverse and back up 15feet then shift to drive and the 4wheel drive lights should all be off. then you'll be in 2x2 rear wheel drive. thank you for choosing fixya.com
You can shift between 2Hi and 4Hi when the truck is moving. Just let off the gas and shift it. But in order to shift to Neutral or 4Lo you need to stop the truck and shift the transmission into neutral then shift the transfer case.
sometimes you have to reverse for it to kick out of four wheel drive. Make sure you put the truck into neutral before you switch out of four wheel drive into two wheel drive. If that doesn't work, your transmission might be sticking.
×