My car battery went flat and since getting a new one my car alarm wont arm or disarm or anything at all using either of the remotes, how do i reprogram new keys without an old one working please help?
For security reasons this is difficult to reset usually the car and remotes need to be set up again. it happens when the car loses power so if the car is stolen or imobilised the car forgets the key codes.
take the car to a dealer or Machanic shop. prove to them it is your car and they will set the remotes back up for you.
i hope this was useful
SOURCE: Car remote lock/unlock no longer working
Check the batteries in your remote the may need replaced and if working OK check to see if you power locks work pushing the door switch. (If batteries are low they may not disengage both the alarm and the locks)
SOURCE: 2001 subaru impreza WRX unlocking doors with key
usually after opening the door you can deactivate the alarm by pushing th unlock button or simply insert keyy in ignition and turn it on.
SOURCE: 2000 Chevy Impala, alarm remote issues
you should be able to however im not sure if it is associated with the on board system if all else fails reconnect it and maby change the batteries in the remote for a starting point
SOURCE: Car won't start after installing new battery
You should have 2 keys andthe other one is the one for unlocking the safty alarm and turns on the power to starter.
Check it out
265 views
Usually answered in minutes!
The installed Alarm is not a factory fitted item, it is an aftermarket SPY One way car alarm.
×