Dodge neon how do you reset check engine light

SOURCE: 2005 dodge neon light stays on

i have a 2003 dodge neon and mine does the same thing and i had the oil changed by the dealer, its full of oil as well, they put just a tad over in it and the light comes on and blinks for second then goes off and the only thing i do is let the oil go out on its own and get to the level its supose to be and once it gets to that it will stop, well it should but if you want to be sure have it checked out. i hope this helps you out, let me know if it does.

SOURCE: Check engine light

Only two choices, 1 - disconnect the battery for 1/2 an hour, however if there is a problem the code will return. 2 - get a code scanner and figure out which sensor is giving the fault code and why? then fix the issue.

SOURCE: reset check engine light

The lught can be reset with an OBDII scanner. Most auto parts places like Advance or Autozone will read and clear the code for free.

SOURCE: flashing light on dashboard 98 dodge neon service engine soon light on

11= Timing belt skipped 1 tooth or more from initial learned value, Intermittent loss of either camshaft or crankshaft position sensor, No crank reference signal detected during engine cranking for dodge odb readout. Hope this helps.

SOURCE: 2005 Dodge Neon drives fine but the check engine light is on

you have to get scanned for fault codes..possible camshaft sensor if you have starting issues..if car is working fine,could be an evap leak..let me know