2000 Ford Mustang Logo

Related Topics:

Posted on Nov 22, 2017

Someone tried to steal my 2000 ford mustang, they messed up with ignition switch, the locksmith put a new ignition lock with new key, but was not able to program the new key, the theft light blinks rapidly, it cranks when you turn the ignition but won't start the engine. if someone has suggistion please. Thank you Ray

5 Related Answers

Anonymous

  • 373 Answers
  • Posted on Jul 10, 2008

SOURCE: 2005 ford taurus. Remote entry wont work theft light keeps blinking when key is engaged

HI, I'm reading your problem,
Let me explain something about your car.

2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.

If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.

OK.. I hope this information work for you.

Thank's for submit yous question on fixya.com

Ad

Anonymous

  • 3533 Answers
  • Posted on Jan 09, 2009

SOURCE: Truck Won't Start At All

before replacing the starter get a volt meter and test the voltage coming out of the voltage regulator which the power comes from the battery to the regulator down to the starter also make sure all wires on the starter are clean and what I mean is from rust because I had an f150 that did the same thing

harley9701ha

Bill

  • 424 Answers
  • Posted on Jan 26, 2009

SOURCE: anti theft system

The chip is in the key. Either the key has lost it's program or the transceiver is not recognising the key. Try another key if you have one.

Anonymous

  • 43 Answers
  • Posted on Apr 13, 2009

SOURCE: 2000 ford windstar won't crank over,but pats keys good, and batt.

First thing I would check is to see if you have power at the trigger wire of the starter motor while someone is trying to start the vehicle for you. It will be a Yellow with a light blue trace. If you do then I would check to see if the main battery cable has power to it all the time when someone is trying to crank it. If it does then I would hold a test light on the case of the starter motor and have someone try to crank it. Make sure that the ground you use for this test is on the negative battery terminal not just anywhere on the car. If the test light lights while you are cranking it then you have a bad ground. Hook up a set of jumper cables from the battery negative terminal and clamp it directly on to your starter motor and see if it starts. If you check it and the test light doesn't light up and all the other checks are good then your starter motor has failed. If one of the other tests has failed then you have a starter relay problem or something else. let me know what you find out.

Anonymous

  • 255 Answers
  • Posted on Apr 19, 2009

SOURCE: 1995 Ford Mustang Engine Won't Turn Off

the ign switch should take care of it i agree with you

shack

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2012 Honda Civic. The ignition switch is messed up, they tried to steal it with a screw driver. How do I fix this please?

Question edited for clarity.
Question moved to moved category.
Duplicate question deleted. Refresh page to see your question.

New ignition keys and ignition cylinder plus reset of the anti-theft immobilizer that stopped them stealing the car. They must be amateurs if they though that was going to work!!

https://www.google.com/search?q=auto+locksmith+near+me

..
1helpful
1answer

Someone tried to steal my 2007 bmw g 650 xmoto and the stearing is locked the key won't turn the ignition. How can I remove the ignition cylinder to replace it?

best have a locksmith do the job . you will need a new barrel and if you have a key then he will be able to code the barrel to that key before installing it
0helpful
1answer
1helpful
2answers

Drove my 2000 Ford Mustang to the store, parked & locked it. Came back out 15 minutes later, unlocked it, got in & put my key in the ignition. The key & ignition switch turned all the way over with no...

Could be a bad battery or your battery cables could be loose or corroded so there is little power getting to the starter.Check all battery cables at both ends and might even have to take the cables off the battery and clean the connections hook up to the battery.
0helpful
1answer

Replace a damaged ignition

talk with a locksmith but the end result will be that the barrel will be drilled out and removed . If you have the original key then the locksmith will be able to reset the tumbler so that you can use the original key in the new lock
0helpful
1answer

ANTI THEFT SYSTEM

Hook up your battery charger, turn the key to the on position for like an hour or two to relearn the key. I have seen this take up to three or four hours (hence the need for a battery charger) if still doesn't work check the purple wire from the ignition switch (prob should check this first) it's the key transponder wire, may have gotten damaged by the a-hole who tried to thieve your car! If these things are ok and the key wont program you'll have to get a new key made (locksmith cheaper than dealer usually)
1helpful
2answers

The security system on 2000 Saturn SL2 will not let me start my car how do i fix it

TURN IGNITION KEY TO ON POSITION FOR TEN MINUTES UNTIL SECURITY LIGHT DISAPPEAR,THEN TURN OFF IGNITION SWITCH FOR 5 SECONDS THEN START THE ENGINE.
0helpful
1answer

My ignition is stuck in locked position and it ownt turn over

It sounds like the classic "switch needs replacing". You only need the tumbler replaced. Before installing the new tumbler take it and your door key to your local locksmith and they can key the new tumbler to work with the old key. This saves you from have to have two different keys.
1helpful
2answers

Lost car keys, how to replace ignition/door locks

Can u open the doors using the ignigtion key or is it two seperate keys?
1helpful
1answer

Chrysler anti theft system 2000 300m

Sounds like the tumblers were messed up. The key shouldn't come out while the ignition is on. If I am right, this has one of those very expensive "Chip" keys? Buying a new key could be more expensive then a lock cylinder. It will probably be cheaper to keep those keys then buy new ones on top of whatever it takes to repair the damage to the lock. You may be better off calling a "Locksmith". Even a new lock cylinder will have to be coded to something. You should be able to find a locksmith that will make a service call.
Let me know how that goes?
Not finding what you are looking for?

225 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...