1993 Ford Mustang Logo
Anonymous Posted on Oct 14, 2012

Idles rough and dies out

My 93 mustang 4cyl automatic hatchback broke down on me the other day. Both the belts had fallen off, but they wernt broken so I put them back on. The car still idles rough (rpms dive down below 1,000 and it often cuts out). If I steadily hold gas down the rpms go up and it revs like normal but if I push harder on the gas it completly dies out. I can move it but I have to let it roll or it will cut out before it moves even an inch. I also noticed I am getting extremely poor gas mileage. I replaced the fuel filter and it still does the same thing. I noticed that when it is running the radiator fan does not spin( i dont know it its just not hot enough for it to start spinning or what). what could cause this all to happen?

  • Anonymous Oct 14, 2012

    I dont think its the idle air control. i will try it tho.. but what gets me is the belts falling off right as this happened.

×

1 Answer

Ken Hiester

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Greenhorn:

A rookie expert who has answered 20 questions on their first day.

  • Contributor 32 Answers
  • Posted on Oct 14, 2012
Ken Hiester
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Greenhorn:

A rookie expert who has answered 20 questions on their first day.

Joined: Oct 14, 2012
Answers
32
Questions
0
Helped
10204
Points
84

One ting comes to mind with your description. The throttle position sensor. They are NOT waterproof and if it got wet, it is shot.

  • Anonymous Oct 15, 2012

    would that cause the engine to produce a little white smoke on the passenger side of the engine. I didnt notice it before but I did this morning

  • Ken Hiester Nov 02, 2012

    If it was a cold morning, the white smoke would actually be water vapor (steam) from the exhaust.. Also, when is the last time the oxygen sensor was changed?

×

2 Related Answers

Randy Ohler

  • 14585 Answers
  • Posted on Jan 22, 2011

SOURCE: whenI push the gas pedal

The first thing I would check is the engine coolant temperture sensor. Check for codes. Check the air and fuel filters. All of these will cause your symptoms. Let me know and we can go from there
Randy

Ad

Anonymous

  • 86 Answers
  • Posted on Aug 04, 2012

SOURCE: i changed the fuel pump recently. now im having trouble getting enough gas or keeping truck to idle.my mazda b2200 truck now cuts out completely on highway while gas peddle touches the floor without a

More likely electrical and not the fuel, hv yr electrics chkd. Could be air getting into the fuel line rechk the joins and line for leaks. cheers

Testimonial: "im gunna check lines, etc.my mazda b2200 truck has also been diagnosed with a bad carberator from local mechanic.diagnosis in relations to the same symptoms stated in my original qestion stated above.your info is greatly appreciated,Thanks! "

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Broken timing belt damage engine 93

You mean it will crank but not start ? Do you have normal compression, spark and fuel pressure ?
If the timing belt broke you won't have compression on all cylinders.
0helpful
1answer

2001 ford focus 4cyl automatic when pulled up behind someone car popped then died and now the starter just spins any ideas what may have happened

check to be sure the pop was not the timing belt broke. if car poped then quit, it is a possibility! if it broke car will not start !! replace if needed. Pull the distributor cap, and turn the engine over. It you see no movement, the belt is broken.
1helpful
1answer

Need help with 2003 toyota camry 4cyl idle

Changing the belt on your car will not make it idle rough, it would not matter if you put it on backwards, upside down, or inside out. The car would just spin the belt off or chew it up. I think that possibly a sensor wire or a vacuum line was broken or knocked off when you were installing the belt. Look for something like that and I think you will find your problem.
0helpful
1answer

I have a problem with my 1990 ford mustang the tensioner pully locked up and broke the belt so i got a new one and now my car is idling at 2 1/2 and will not go down i have no clue what it could be vacuum,...

Odds are that the broken belt took out a vaccume line while it was flailing around,that would be the first thing that i would check for.Any hard plastic or rubber lines that are within stiking distance of the broken belt would be suspect.
0helpful
1answer

93 mustang 4cyl a4ld .goes in all gears but when I put it in over

front clutch gone /failed or fluid level low .check with engine running handbrake on then put it in reverse and check level
0helpful
1answer
0helpful
1answer

I have a 92 mustang lx 4cyl. timing belt broke and now i have the cover and pullys off but can not get the new one on cause it appears to be a crank senser in the way! how do i go about getting it off?

check first if this is called a safe engine first as you do a lot of damage to the engine if the timing belt broke such as valves and otheres
0helpful
1answer

Rough Idle and then the veh cuts off

Have you tried cleaning the mass air flow sensor ? Use Qtip and carb cleaner to remove any gunk on the two wires that strech across the inside.
0helpful
1answer

1996 FORD CONTOUR 4CYL ROUGH IDLE ROUGH ACCELERATION

no problem. If you are getting that low of voltage on a load then you might want to test the alternator as well to make sure it is running at capacity.
1helpful
2answers

Kia Optima

Is the car flashing any codes. I would look for fuel issues possibly fuel filter, injectors etc. Because these items are easier to check. Otherwise it sounds as if the timing is off on the car. If the Hydraulic tensioner is not replaced this could cause the belt to jump teeth as well. PRETTY SURE YOUR TIMING IS STILL OFF
Not finding what you are looking for?

193 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...