Looking for timing belt mark locations
SOURCE: need diagram showing timing adjustment for a 1992
Check the position of the timing marks. The timing pointer mustbe perfectly aligned with the TDC (white mark) on the flywheel orflex-plate; the camshaft pulley must be aligned so that the word UP isat the top of the pulley and the marks on the edge of the pulley arealigned with the surfaces of the head. Additionally, the face of thefront timing balancer pulley has a mark which must be aligned with thenotch on the oil pump body. This pulley is the one to the left crankwhen viewed from the pulley end.
Also, in here, 1994-Honda-Accord-Coupe-Section-01-Engine (page 47 and next / TDC marks) you can find referenece information about Accord Engine.
If you need more details, visit autozone.com (free register) and select your model vehicle.
I hope help you (remember rated this help) Good luck.
SOURCE: the timing belt diagram for a honda odyssey 96.
I find that Advance is very helpful on these ?
Testimonial: "thanks. "
SOURCE: timing marks on honda 1.5 for timing belts
On camshaft pulley you will find two lines directly opposite eachother these lines will be level with the head line(horizontal). crankshaft pulley will have 3 lines notched into pulley edge. middle one(white paint)is top dead,and will be lined up with pointer on lower belt cover.with crankshaft damper removed ,lower timing gear has a dot stamped on ft face whitch lines up with arrow on block casting(12:00)
SOURCE: need to know how to line the timing marks on the
there is a timing mark on the timing cover that lines up with the mark on the crank pulley (i believe the mark is above the white dot on the crank) then on the 2 gears up top, there are lines that should line up horizontally with the top of the timing cover.
1,100 views
Usually answered in minutes!
×