SOURCE: Break Lights won't come on in my 1988 Jeep Comanche
Why replace the whole fuse box? That's rediculous. If you can't find the fuse box, just fix the affected circuit. Did they check the brake switch?
SOURCE: need wiring diagram for 1988 jeep comanche 4x4 6
check the solenoid on the starter it powers the ign for starting then switches to run when you let off key,either the solenoid is bad or a wire to the solenoid has come unhooked and sometime they have an in line fuse which can blow.
SOURCE: 1988 Jeep Comanche transmission will not shift automatically
chapters and indago sell chilton books they are a god send the have all the wiring diagrams in the back of the book also auto zone carries the books too
SOURCE: I need the rear brake diagram on a 1988 jeep
One caution on this design is to make sure the cable slide stays in the shoe, or the cable will be loose. With the slide in the shoe and the cable attached to the top post, put the return spring on to hold the slide in place before attaching the cable to the self adjuster at the bottom.
please let me know if you have any questions, and thanks for using FixYa.
317 views
Usually answered in minutes!
×