1992 Acura Integra Hatchback Logo
Posted on Dec 30, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Acura Integra '92 loud clunking when accelerating

So, I wasn't having any problems then my car sat for 2 days after Christmas and when I drove it home (yesterday) the problem suddenly began. It started with a clunking noise and a bit of vibration when accelerating in 4th and 5th. Then today after driving the car for 10 minutes the vibration got worse and the noise in much louder. This is now happening in all gears between 2k & 3k rpm and lessens to a fine vibration at higher speeds. Again, this only happens during acceleration. If the car is in neutral it wont happen, I can rev the engine and no noise. The clutch seems to be working fine, no problems with shifting the engine sounds normal but when I speed up its a very loud clunk and the vibration almost feels like something hitting the firewall. Other than that nothing is wrong with the car that I'm aware of other than an exhaust leak that developed early last week. I'm about to get under the car but I'd thought I'd post and see if I can get some feedback any input is very much appreciated. Thanks.

-Steve V

  • steve_swv Jan 01, 2009

    So far a shop mechanic told me it was the motor mounts which will cost 500+ to replace all 4 and another mechanic said that only one of my motor mounts are bad but that isn't the problem. He says the spark plugs are bad and that they are causing this....I'm still not sure

  • Tony LaMothe
    Tony LaMothe Sep 12, 2013

    check your universal joint on your drive shaft sounds bad thats why it clunks when you put it in gear

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Expert 59 Answers
  • Posted on Dec 30, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 30, 2008
Answers
59
Questions
1
Helped
18635
Points
158

You can check the wheels make sure there on tight and make sure you tie rods and wheel bearings are good

  • Anonymous Dec 30, 2008

    you can check the wheels make sure there on tight and make sure you tie rods and wheel bearings are good

  • Anonymous Jan 04, 2009

    it could have bad spark plugs cosing it to miss witch would cose a vibration

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 92 Acura Integra is not starting could it be my transmission fluid level

Search Results

    "No start" Due to Failed Fuel Pump Relay : Acura Integra ...

    repairpal.com > Problems > Acura > Integra
    where is the fuel system relay located at?I have replaced the distributer 2 times and also the... 1992 Acura Integra. fuel pump???? The car does not start unless I ...

    92 Integra wont start! Very weirdo problemo... - Honda-Tech

    honda-tech.com/acura-integra.../92-integra-wont-start-very-weirdo-probl...
    Jun 13, 2012 - Re: 92 Integra wont start! Very weirdo problemo ..... 91 Integra LS Defroster/Water Leaking, Bigmo5328, Acura Integra, 8, 01-30-2014 12:14 PM.

    92 DA9 WILL NOT START!!! - Team Integra Forums - Team Integra

    www.team-integra.net > ... > Generation Specific > Generation Two

    Apr 5, 2010 - 11 posts - ‎9 authors
    I just bought a 92 integra with the B18A1. The guy I ... Team-Integra.net is the premierAcura Integra Forum on the internet. ... But it still won't start and I don't know what is up. .... Engine will not rotate when attempting to start 98 gsr cranks but won't start. - Team Integra Forums ...
    10 posts
    Feb 9, 2012
    1992 Acura Integra NO SPARK! - Team Integra Forums ...
    15 posts
    Feb 5, 2012
    92 integra wont start after driving - Team Integra ...
    15 posts
    Oct 17, 2010
    Car wont start! has fuel but lil spark..? - Team Integra ...
    15 posts
    Dec 1, 2008
    More results from www.team-integra.net

    My '92 Integra cranks but does not s

0helpful
1answer

I went and looked at a Jeep Wrangler 2006 model. When we test drove it from 1st to 2nd gear (manual) it made a very loud clunk noise. My partner purposly bunny hopped it to see how it sounded and it made...

depends on the price
at this point -give it a miss and look at something that doesn't have any obvious problems
remember the joke
Santa was late for Christmas because he bought a jeep
0helpful
1answer

92 acura integra healdlight

their is a cover behind the headlight ,either a rubber one or a plastic one ,remove the wiring plug then push the spring clip down and pull it back so it comes free ,then the bulb can pulled out
0helpful
1answer
3helpful
2answers

I have an 1992 acura integra Ls And does not want to start

I recommending checking your ignition coil as there is most likely a hairline crack that is allowing moisture to get in. Take a hair dryer and blow it on the coil for several minutes after you've washed your car and if it starts, then it's definitely the coil... it's very common
0helpful
1answer
1helpful
1answer

Acura lowering problem clunking front end

you got worn c v joints check for cut or damage boot.
0helpful
1answer

Transmission won't shift fron 1st, 2nd or 3rd correctly!

Sorry to inform you that it sounds like your transmission needs servicing.
Check the fluid levels and replenish if level is down.
If after doing this,the car still wont shift properly or smoothly,,then you will have to take the car into a transmission mechanic.
0helpful
1answer

Transmission Problem???????

check the linkage for the selector and see if anything is binding.
0helpful
1answer

Acura 92

I finally just had this fixed on my 1992 Integra, after dealing with it the past year or so (same problem, and only in cold weather). They replaced the shifter switch (parts and labor cost me $150), and it's been fine ever since, I'm very happy to say!
Not finding what you are looking for?

852 views

Ask a Question

Usually answered in minutes!

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...