Driver side wiperarm won't move

take door panel off it has probably fell off runner

Check underneath the seat for an inline fuse. It is a glass type fuse in a fuse holder that you have to push and twist to get out.-----------------------------------------------------------------------------
XPROG-M

If the switch is broken, you can put the switch down, short circuit closed first, if is bad, there is no way to the machine. Had better find a repair shop.car key programmer

Sorry, there are no current prices on replacing leather seats for a 1999 Mazda. However, check out the web site and you may find a dealer who will replace the leather. www.mazdapartscenter.com

if you need an Car Key Programmer, click here:Car Key Programmer

Before you do any of the expensive things disconnect and reconnect the wiring to the seat I had the same exact problem with my 2009 Chevy Impala and was ready to take it to the dealer when I disconnected the power cables to it and reconnected them I found that one of the Harnesses was loose and the problem was solved

since the door is open,, hold the handle in the open position and try and move the little hook looking latch , it may have just moved into the closed position , if you can move it to the open position, then your home free

Check in the high amp fuse box under the hood as one of those fuses may be blown causing no power to several accessories.

it seems the motor is working ok so it only leaves your linkage or the actual wiperarm mounting to fault.remove the retaining nut on the drivers side wiper arm usually a 12 or 13 mm spanner.once removed turn wipers on and keep hands clear, look at the drivers side spindle,if it turns when the other wiper moves your linkage is ok and you need a new arm, if it dosn't move then its your linkage,hope this helps!

unlock bye push on the plastic on the wiperarm hokk.then push to the left. /if ther are an screv reles this.)bye new wipers there are one plastic in the boks use this one how locks like the old. put the wiperarm in the middel of the wiper the pul to one of the side for lock.