Ive remove everything it's just a silver metal piece that confuses me it hold the headlight retainer in place How do I replace the low beam bulb in a 2000 Acura TL headlamp?
Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.
btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and
the ignitor. The bulbs usually start to loose their color long before they burn out.
The inverters/ballasts either go out after a while or take a while to
start up.
Before you spend money on a new bulb, try swapping it with the one on
the other side. You'll need a security torx screwdriver to get the
covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.
If the problem stays on that
side, try swapping the ignitors. They're mounted inside the black
covers.
If the problem is still on that side you've got a bad inverter. They're
mounted on the bottom of the headlight assembly. You'll need to remove
the front bumper and remove the headlight assembly to get to it. (I
recommend you take pictures as you remove things so can put them back
together correctly.)
6,389 views
Usually answered in minutes!
I have an acura 3.2tl 1999 and my front headlight on the paasenger side is out but it comes on for a few seconds when i first turn the lights on but then its turns tight back off and the one on the driver side stays on
replace headlight on a 2004 acura tl
My 2000 acura tl will not cut on
Replace navigation disc
Replace navi disc
Ignition senses that fob is still in place
I'm trying to find instructions on how to replace the headlights without taking the bumper off.
Where is the fuse located for the power sockets in my 2001 Acura TL?
×