SOURCE: hood release wont latch
This maybe a problem of the hood being misaligned. in order to remedy this you will have to adjust the 4 bolts on the hinges holding the hood in place and the latch little by little. But first try a penetrating oil on the latch assembly and look for anything out of place.
SOURCE: i have a broken hood latch and the hood is down
I think your cable came loose from the latch. try to see it through the grill, maybe you can get to it with a long flat tip screwdriver
SOURCE: Hood latch is pulled open
Have one person pull on the latch inside and the other person pull up on the hood (sometimes depending may have to use a thin screwdriver to pry up carefully not to chip the paint). Once open lube the hood latch under the hood with wd-40. Make sure the latch inside is still connected to the wire.
SOURCE: i have a broken hood latch and the hood is down
Hi there,
Yes, there is a way. I've had to do it three times. Once I got it the first time, 2 and 3 were easy. You're going to need a flashlight and a long screwdriver or needlenose pliers.
Get to the grill and look through with the flashlight. You're looking for the hood release cable. Follow it as far as you can to just beneath the hood latch.
Now look for the clamp on the outer part of the cable. To the left of that you should see the inner cable (the part that moves and pulls the latch). Try to either grab it with the pliers or get the screwdriver above it and pull down. You'll here it click open when you get it.
If the cable is broken or off, you're still in the right area. Look for the latch assembly, there are two or three small arms beneath. Try to move each one to the right. Be patient, you'll get it open.
Comment me back to let me know how it goes.
Good Luck
Mike
8,011 views
Usually answered in minutes!
×