At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi,, i just change new wiper motor and still dont work?? please help me ,if you can,,,
2005 Taurus wiper washer motor won't work. I tested the pump-OK, Multifunction switch -OK; told it might be the "Smart Junction Module: ? How do I test SJM ?
Check the Relay in the Battery Junction box it is the 3rd one from edn oposite if 3 small fuses close to it with a 5 amr fuse in the middle. Hope this helps it realy should from the sounds of it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the intermitent works off of the (gem) generic electronic module which controls the wipers. if wipers working except the delay cycle replace the module. the relays are located in the engine compartment . wiper park relay- wiper hi-lo relay- washer motor relay. fuse in fuse panel under driver side dash panel.
check the fuses and the curcuit breaker just underneath the dash on the driverside and it should be like a small silver box on the right side near the top check this out also
This may be multi-function switch failure. The multi-function is the turn signal/wiper/headlight switch. It may need to be replaced. Is this the type of switch you have. Hope this helps. If it is not the switch then the pump may be bad or have a bad wire connection.
GOOD LUCK
×