The blinker started the fast blink thing, so I checked and both tail lights and both blinkers are not working. The 3rd high brake light does work. I have replaced the bulbs in the tail lights. Still nothing. Maybe a fuse?
There's a switch on the brake pedal arm, that controls the brake lights. The switch may need adjustment or replaced.
Hope this helps.
Most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.
SOURCE: how do i pull off the lens for rear break bulb to
Open the rear gate. There are a couple screws you need to take out to remove the whole lamp assembly. Pull the bulbs out and replace then replace the lamp and put screws back in.
1,175 views
Usually answered in minutes!
×