My fix engine light is on and where do i need to go to fix it

misfire cylinder number 1 need to check wiring coils plug for the number 1 cylinder
https://www.engine-light-help.com/P0301-check-engine-light.html P0301 OBD II Trouble Code Fixing Misfiring Engine P0301

How to fix your check engine light. - Instructables

www.instructables.com/.../How-to-fix-your-check-engine-li...

InstructablesStep 1: Buy an OBD reader. ... OBD stands for on board diagnostic. ... The OBD codes for a leaky gas cap are misleading and this happens a LOT, especially if you've recently gotten gas.

How to fix your "Check Engine" light ' Mobil™ Motor Oils

https://mobiloil.com/en/article/car.../how-to-fix-your-check-engine-light

Discover the mystery behind your pesky "Check Engine" light coming on before ... youcan likely do the job yourself and avoid that expensive repair shop visit.

Top 10 Check-Engine-Light Car Repairs ' Bankrate.com

www.bankrate.com/.../top-10-check-engine-light-car-repairs-1.a...

BankrateWhen the check-engine light flickers on your dashboard, don't stall. ... If you do not have Auto Zone call one of the other auto parts stores to see if they offer that service.... Catalytic converter is an easy fix; cut it out and replace with straight pipe.

HOW TO RESET CHECK ENGINE LIGHT, FREE EASY WAY ...

? 4:02
https://www.youtube.com/watch?v=H0EksnuQdMs
Jul 23, 2013 - Uploaded by Tampatec
HOW TO RESET CHECK ENGINE LIGHT WITHOUT ON ANY TRUCKS ... Code Reader gives you correct error code readings and can do ... How to reset engine warning light Toyota Corolla VVT-i engine and fix ignition error.

Why Did my Car's Check Engine Light Come On? ' Angies List

www.angieslist.com/.../why-did-my-cars-check-engine-light-...

Angie's ListA check engine light on a car can indicate anything from a loose gas cap to a more

You need to find out what code or codes are stored in the PCM/ECM - engine computer , before you know what to fix ! Check Engine Light On read about OBD2 - onboard diagnostics an sensors etc...

You need an OBD-II scantool to reset the Check Engine light. Places like Autozone will read your codes for you but most will not reset the Check Engine light because of liability issues. You need to either purchase a code reader with reset capability or find someone who has one to do it for you.

You need to have a mechanic hook up a code reader/ scanner, and see what is causing the engine light to come on. Fix the problem, and have them clear the engine light.

need code scanner but first find what causes check engine light to turn on.you need to code scan find what code you are getting fix bad sensor.then use code scan to erase code.if you dont fix problem will check engine light will stay on.

you will need to have the computer read. some auto parts stores will do this for free. check back when you have the code(s)

WELL IF SERVICE ENGINE LIGHT IS ON YOU HAVE A FAULT IN ONE OF THE SENSORS.YOU NEED TO SCAN CAR WITH CODE SCANNER SO YOU CAN FIX THE FAULTY SENSOR.THEN ERASE CODE.IF YOU DONT FIX THE PROBLEM THE SERVICE ENGINE LIGHT WILL STAY ON.

You can do both IF there is nothing wrong with your car it will go off on its own usually between 2 and 4 hours of driving. Otherwise it may need to get reset if it still thinks there is a problem

The easiest way is to disconnect the battery for about five minutes. This will reset the computer and clear any codes. Once you connect the battery you need to take the car out for a drive and let the computer relearn your driving habits. It you have something wrong with the car the check engine light will come on again. You will need to get the error code and fix the problem for the light to stay off permanently. Most car parts places will check your computer for error codes free.