Hi,do you have any 1997 malibu 3.1 intake and rocker arm torque specs. thanks. joe
www.synthetic-distribution.com
SOURCE: i need the engine torque specs for 99 chevy malibu
99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in. lbs.
SOURCE: I have 4.9L6 need torque specs for cylinder head
for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.
SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine
Head Bolts
Step one 37 ft lbs then tignten 120 degrees more
Rocker arms
Step one 11 ft lbs then tighten 90 degresss more
Upper intake
89 inch lbs
Lower intake
132 inch lbs
SOURCE: I need to know the torque specs for the rocker arm
Hello.
The torque specification on the rocker arm nut is 22 ft/lbs
I hope your repair goes well.
KL
Testimonial: "Thanks a million! My repair is going very well and should finish up tonight."
3,101 views
Usually answered in minutes!
×