Question about 1995 Jeep Grand Cherokee

1 Answer

How to replace headlight assembly in 1995 Jeep Grand Cherokee

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I just bought after market headlight assembly units for my 1995 jeep grand Cherokee limited. The ball won't stay in the plastic piece. Won't snap in like the old one did. What do I do?

Posted on Oct 27, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

dlee388

  • 2 Answers

SOURCE: How to replace headlights on 2000 Jeep Grand Cherokee

One long bolt at the top - requires a 7mm socket to remove the bolt. The light housing will pry out with a screw driver. There are three ball and socket type connectors that hold the housing in and I just pryed off the plastic housing carefully and "balls" pop out of the sockets. Finally, I was replacing the faded plastic housing and it came with a new wiring harness. It's impossible to reach the connector to use the new wiring harness that comes with the new plastic light housing. So just use the existing wiring harness with the new light assembly.

Posted on Feb 06, 2009

hribrahim

  • 90 Answers

SOURCE: HOW TO REMOVE HEADLIGHT ASSEMBLY 2006 JEEP GRAND CHEROKEE

remove the 7mm bolt in the centre top of lamp unit then with a big screwdriver just behind headlamp prise outwards quite firmly

Posted on Jul 03, 2009

MNfisherman

Nate Stansfield

  • 11896 Answers

SOURCE: serpentine belt on a 1995 jeep grand cherokee

let me know if this looks correct. If not I will find another diagram. Available at google images

b180d86.jpeg

Posted on Nov 15, 2009

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: change a headlight assembly Jeep Grand Cherokee

Just need take off the screws; for details check the graphics and ilustrations in the Jeep ZJ Grand Cherokee Service Manual

Hope helps (remember rated this) Good luck..

Posted on Jan 20, 2010

Anonymous

  • 1 Answer

SOURCE: Jeep Grand Cherokee Laredo 1998 headlight assembly instructions

youtube.com type in 1998 grand cherokee headlight assembly, I just fixed mine in 10 minutes, both of them!

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fit a new headlight bulb on 1995 jeep cherokee


Check this details, from the Repair Manual...
2_27_2013_8_57_15_pm.jpg


HEADLAMP BULB REMOVAL
(1) Lift hood to access lamps.
(2) Reach into engine compartment and locate lock ring supporting the headlamp bulb assembly.
(3) Rotate the lock ring 1/8 turn counterclockwise (Fig. 5).
(4) Pull the bulb (9004) straight out from the housing. This is a halogen bulb, take care not to touch it with your fingers.
(5) Replace by seating the assembly in the lamp housing and turning the lock ring 1/8 turn clockwise to secure.

Hope this helps.

Feb 27, 2013 | 1995 Jeep Grand Cherokee

1 Answer

Removing and reinstalling a new headlight assembly in a 95 jeep grand cheerokee


LIGHTING Headlights REMOVAL & INSTALLATION Cherokee, Wagoneer and Comanche Models Fig. 1: Remove the top corner headlight bezel mounting screw 91076p12.jpg
Fig. 2: To access the turn signal bulb or headlight bezel mounting screws, remove the 2 turn signal housing retaining screws 91076p13.jpg
Fig. 3: After removing the turn signal housing from the headlight bezel, remove the 2 bezel mounting screws . . . 91076p27.jpg
Fig. 4: . . . then carefully pull the headlight bezel away from the headlight assembly 91076p11.jpg
Fig. 5: Remove the 4 headlight assembly retaining ring screws . . . 91076p07.jpg
Fig. 6: . . . then pull the retaining ring off of the headlight assembly 91076p06.jpg
Fig. 7: Pull the headlight assembly away from the vehicle just far enough to disengage the electrical connector from behind the headlight 91076p28.jpg
  1. Remove the headlamp bezel and retaining ring attaching screws. Remove the bezel and retaining ring.
  2. Pull the headlight out, disconnect the wire harness and remove the headlight from the vehicle.
  3. Install the headlight in the reverse order of removal.
Grand Cherokee and Grand Wagoneer Models
  1. Open the hood, reach into the engine compartment and locate the lock ring supporting the bulb assembly.
  2. Rotate the lock ring 1?8 turn counterclockwise and pull the bulb straight out from the housing. To install:
  3. Install a new bulb and position the bulb assembly in the lamp housing.
  4. Rotate the lock ring 1?8 turn clockwise to secure.
----
The Grand Cherokee will have an assembly that is fastened with bolts and screws to the body.
Get the new assembly and compare to the old one to see where to unfasten the bolts and other fasteners to aid in removing quickly.

Oct 08, 2010 | 1995 Jeep Grand Cherokee

1 Answer

How to remove a headlamp assy from a 1998 jeep grand cherokee


I believe the headlight assembly just pulls straight out. There are locating lugs on the headlight assembly which line up with corresponding lugs on the body work. There is also a problem with the headlight glass falling out as well. Replacements can be bought at the right price on e'Bay.

Feb 27, 2010 | 1998 Jeep Grand Cherokee

1 Answer

Change a headlight assembly Jeep Grand Cherokee


Just need take off the screws; for details check the graphics and ilustrations in the Jeep ZJ Grand Cherokee Service Manual

Hope helps (remember rated this) Good luck..

Jan 20, 2010 | 1998 Jeep Grand Cherokee

1 Answer

Compatibility of parts?


Only bulbs and fuses, maybe tires.Sorry

Jan 05, 2010 | 1998 Jeep Grand Cherokee

1 Answer

How do you know if the whole headlight needs to be replaced or just the filament? 1995 Jeep Grand Laredo


check bulb socket with volt/ohm meter..make sure you have headlight switch to on position.

Jan 02, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Looking for instructions on how to replace headlights on a 1996 Jeep Grand Cherokee; purchased replacement fixtures, but can't figure out how to remove/replace.


Is this the headlight bulb replacement or headlight (assembly) replacement? For bulb replacement:
1. Disconnect negative side of battery.
2. Open hood.
3. Reach behind the neadlight assembly and disconnect the wiring connectors.
4. There is a locking ring around the back of the headlight assembly. Turn this counterclockwise.
5. Gently pull out the bulb.
6. Insert new bulb into the locking ring.
7. Place these back onto back opening and turn clockwise making sure it is flush and totally engaged.
8. Replug wiring connector.
9. Reconnect negative side of battery.
10. LIGHTS!!

Nov 25, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1993 Jeep Grand Cherokee headlight assembly removal


Thairs 2 screws under head light and one on top corner of light.

Sep 19, 2009 | 1993 Jeep Grand Cherokee

2 Answers

Jeep Grand Cherokee Laredo 1998 headlight assembly instructions


youtube.com type in 1998 grand cherokee headlight assembly, I just fixed mine in 10 minutes, both of them!

Mar 31, 2009 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

733 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...