My Ford 2000 F-350 Power Point Fuse is good but I have no power at the outlet?

SOURCE: f350 super duty power stroke diesel loss of power steering when standing still

power steering pump inop.replace pump.

SOURCE: how to replace outside mirrors on a 2002 ford f-250 super duty

you need to remove door trim panel there are (2) 7mm screws that hold panel on .. 1 is behind the lower red light lens and the other is behind switch panel for the power window switch . remove both screws and remove small black panel above door trim by pulling strait off .(now there are (4) 11mm nuts the hold mirror on 2 are behind the small rubber plugs in front of door that you can see with panel on and the other 2 are under panel that you can see after panel is removed . the wiring need to be disconneced you may have to remove speaker for acess to feed new wiring down into the door good luck

zr800o1le

• 19 Answers
• Posted on May 12, 2009

SOURCE: 2006 f350 wont start if warm

It is Vapor Locking at the Pump. The O rings are Swelling too much and will not allow the fuel to leave the Pump or enter the Injectors.
Ford knows of this Problem. Call a Local Mechanic He will have to Fix the Problem

SOURCE: Shut 05 Ford f350 diesel off wont start

dies the truck restart once it cools off? it is very common for th 6.0 to have high pressure oil issues on a hot soak. they will run till the cows come home but once shut off they can not build up enough pressure by cranking speed alone to start truck until it cools down and the seals become rigid enough to bridge the gaps they are sealing in the first please. if this is the case. it may be the STC fitting ojn the back of the high pressure oil pump (intake and turbos must be removed to check) or possibly the branch tube o rings have worn. the branch tubes are located under the valve covers and supply the fuel injectors the oil they need to perform their "power stroke"...

SOURCE: My horn does not work on my 2003 Ford f250 super duty PU truck.

The horn location is on the radiator support.