I have a 1995 Jeep Grand Cherokee - Orvis Edition with a 5.2 litre engine with A/C, and there is no belt routing diagram under the hood or in the owner's manual. The belt broke and I got a new one, but I don't know how it goes on. Does anybody have a diagram of the serpentine belt routing for it that I can get to install the belt?
SOURCE: serpentine belt on a 1995 jeep grand cherokee
let me know if this looks correct. If not I will find another diagram. Available at google images
SOURCE: serpintine belt
This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.
http://autorepair.about.com/library/illustrations/bl506a-lib.htm
SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine
Here's a link to the diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006
Good luck and please rate this solution. Thanks.
Testimonial: "Looks good."
SOURCE: I need a diagram for the serpentine belt routing
Do you know any one with the same vehicle..... under the hood along bonnet/hood landing plate/ radiator mount... you should find a belt routing sticker along with an AC information sticker.... seems yours no longer there.....hope this helps . Steve...... Botwana
SOURCE: I need the routing diagram
No diagram but it goes over the power steering pulley, going ccw, under the top idler (back of belt on pulley), over the ac compressor, over the alternator, up over the fan (backside of belt on pulley), around the crank pulley, over the water pump (back of belt on pulley) then you're back at the ps pump. It's tightened by loosening the pump pivots and using the long exposed jack screw below the pump to move it.
540 views
Usually answered in minutes!
×