Cars & Trucks Logo

Related Topics:

Anonymous Posted on Sep 03, 2012

Remove Injectors from Engine on KIA Pregio - Pregio Kia Cars & Trucks

1 Answer

ARESTI

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Kia Master 1,152 Answers
  • Posted on Sep 03, 2012
ARESTI
Kia Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 09, 2012
Answers
1152
Questions
1
Helped
362200
Points
3284

Is the engine 27diesel J2 ? If so just unbolt all the injectors pipes from top and loose the bolts on the feeding pump side so to enable you to move the pipes.then with a socket of 17mm remove all the bolts (4 pcs) from the injectors holding the return pipe.With a 22mm socket start loosing one by one the injectors and remove them from the cylinder head be careful not anything or any dirt dropped int he injectors holes.

2 Related Answers

Anonymous

  • 11 Answers
  • Posted on May 08, 2009

SOURCE: How to remove engine valve cover of Kia Carnival

YOU HAVE TO REMOVE THE INJECTORS TO REMOVE THE CAM COVER YOU WILL NEED A INJECTOR PULLER OR SLIDE HAMMER AND HAVE TO REPLACE THE INJECTOR WASHERS WHEN YOU REFIT THE INJECTORS OR THEY WILL BLOW PAST

Ad

Anonymous

  • 1 Answer
  • Posted on Dec 15, 2009

SOURCE: the noise from the engine of a kia pregio is so

I own a 2006 kia sportage, 2ltr xs, recently a rumble/rattle noise occurs when revs reduce to idling,my local dealership imforms me that this is simply an idle gear type chatter, because of my lack of confidence with this dealer I gained for a second opinion from my local mechanic, he seems to think that it is a clutch problem, my question to your good selves is, is this a known defect form other owners,

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kia Pregio 2.7. Valve clearance for it please?

Question edited for clarity.

valve clearence for kia pregio 2.7diesel J2 engine bigend ...

JustAnswer https://www.justanswer.com > Australian Car Repair
Feb 21, 2011 - Hi, it's Glenn here. I can help you with your question. Valve clearance: Cold:- Inlet - 0.30 Exhaust - 0.38. Conrod Torque: 69Nm, back off, ...

What is the Valve clearance for the 2002 kia pregio diesel ...

Answers.com https://www.answers.com > Auto > Asian Cars
Oct 24, 2022 - 2mm for intake and .3mm exhaust. or .008in and .012in when the motor is warm. not sure for cold motor. What is valve ...
0helpful
1answer

Kia pregio 2000 kia pregio electrical wiring diagram

Greetings,

Please reach out to your local independent mechanic or car parts store in order to request the kia document that you're looking for. If they don't have it, they might be able to direct to a website where you can retrieve the document.

Thank you.
0helpful
1answer

What is torque settings for head bolts on Kia pregio 2001

What are the cylinder head torque settings for a KIA K2700

www.answers.com > ... > Categories > Cars & Vehicles > Asian Cars > Kia
What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...
0helpful
1answer

Kia pregio problems

Destroy your radiator, drain all the oil, and redline this piece of junk
1helpful
1answer

How to repair kia pregio alternator

i have converted my kia pregio alternator to recondition alternator for kia carnival problem is when i used all electrical such as aircon and light the alternator was not charging properly during traffic therefore when I need to turn off the engine i need to charge the alternator by pressing the gas for few minutes before turning off. please advice. thank you
0helpful
1answer

Kia pregio torque setting

Tighten toque main bearing cap for kia prigio
1helpful
1answer

How to change the globe to the headlight of my Kia Pregio GS 2005 van

To replace headlight bulb of kia pregio van: You only need Phillips screw driver and 10mm socket or open wrench. Open the hood, remove front grill with 4 phillips screw. This will give you room for your hand to pull out the headlight housing later on. Next is remove the signal light housing by unscrewing the phillips screw on top of the headlight housing then pull out the signal light housing and remove the bulb. You will see 2 pcs 10mm bolts on the side which hold the headlight. Loosened and remove the bolts on headlight holder then pull the headlight sideward. Remove power supply socket before removing it completely from the van. Remove bulb socket, spring clip, and busted bulb and replace with new one. Reassemble the disassembled parts in reverse order. That's it, will take you only 10 minutes.
0helpful
1answer

Kia Pregio missfire over 2500rpm, starts and runs perfectly

Generic problem for all Kia Rio Cars Kia Pregio missfire over 2500rpm
Not finding what you are looking for?

581 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...