SOURCE: loation of spark plugs on 2006 chrysler sebring
They go into the cylinders through the middle of the valve cover.
SOURCE: illustration of where spark plugs go on a 2006 chrysler sebring
Easiese solution is to trace the spark plug wires to the individual locations.
SOURCE: Is it difficult to change the spark plugs on a
Yes. Yopu must remove the plenum, which means a new gasket.
The plug wires go down into the valve covers. The circular gaskets there often leak, so I would replace the wires and gaskets around them at the same time because it is all exposed.
SOURCE: 1999 Chrysler Sebring Convertible code P1495. I
Code 1495 = Leak Detection Pump Solenoid Circuit
Remove the connector from the solenoid (should be on the back wall,
just to the drivers side of the air-hat). You will have the solenoid
to check and the harness. What you want to measure is the voltage
coming from the harness and the resistance of the solenoid.
Turn the
key to the "ON" position but do not start the motor; the voltage at
the connector should be at least 10V or more,.now, check the
resistance of the solenoid (should be around 35 ohms).
Hope helps.
81 views
Usually answered in minutes!
×