FROM THE BOOK: The evaporator housing drain hose is located on the firewall (coupe but other models similar). To remove it for cleaning simply pull it off.
RECOMMENDATION: Operate the a/c system for about 10 minutes at least once a month, particularly in the winter. Long term non-use can cause hardening, and subsequent failure of the seals.
SOURCE: where the termastat located on a 2002 sebring
If you look at the hose coming off of the topm of the radiator, it should connect to a neck that is covering your tstat, probably two bolts to remove and you may have to tap it to loosen it after taking bolts out.You will probably lose some antifreeze when you do this so make sure your in an area where you can wipe up any spilled coolant.
SOURCE: 2002 Chrysler Sebring Oil pressure light
Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.
SOURCE: Where is the PCM located on a 2002 chrysler
The PCM (Powertrain Control Module) is the aluminum box with fins that is behind the left headlight and toward the engine a bit. It's about 12" long 6" high and 2" thick and runs lenghwise from front to back. The box right behind the headlight that is about 6x6x2 and runs side to side, is the TCM ( Transmission control Module).
SOURCE: oil sending unit on 2004 chrysler sebring V6
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
SOURCE: Where is the fuel filter located on a 2004 Chrysler Sebring Sedan
Some of the Sebrings have two filters(one is called a sock).The sock(which all sebrings have) is located in the fuel tank itself on the pump module.If this model is the JXI then the external filter is located on the belly of the car between the tank and drivers rear seat. I hope I could help!!!
454 views
Usually answered in minutes!
×