Check engine light come on fault codes PO165 and PO155

Here's a link for codes P0446,P0443. https://www.obd-codes.com/p0446 Here's the link for P0403. P0403 Exhaust gas recirculation EGR circuit malfunction Here's code P0135 P0135 OBD II Trouble Code O2 Sensor Heater Circuit Malfunction Bank 1... Here's code P0141 P0141 OBD II Trouble Code O2 Sensor Heater Circuit Malfunction Bank 1... Here's code P0155. P0155 OBD II Trouble Code 02 Sensor Heater Circuit Malfunction Bank 2... Here's the last code.yay P0161. P0161 OBD II Trouble Code HO2S Heater Circuit Malfunction Bank 2 Sensor 2... The last 3 codes might just be one sensor.

code p0054 is
Possible causes - Faulty Heated Oxygen Sensor Bank 1 Sensor 2
- Heated Oxygen Sensor Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Sensor Bank 1 Sensor 2 circuit poor electrical connection
When is the code detected?Heater current requirements too low or high in the heated oxygen sensor (HO2S) heater control circuit Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
code p0141 is O2sensor heater circuit malfunction( bank one sensor 2)
there is chance that wire from that sensor is touching,part of your exhaust system,and either is open or shorting to ground

code p0036
036 - HO2S Heater Control Circuit Bank 1 sensor 2check the wire from the sensor for the sign cut or melting,and change the sensor

CODE PO161 IS REGARDING OXYGEN SENSOR BANK2 SENSOR2 WHICH IT IS LOCATED IN THE BOTTOM RIGHT SIDE OF THE CAT ON THE OUTPUT OF THE CAT.REGARDING CODE P1135 IS FOR AIR FUEL RATIO OXYGEN SENSOR MALFUNCTION BANK1 SENSOR 1. MY OPINION CHANGE THE SENSOR BANK 2 AND RESET THE FAULT USING A SCANNER AND DRIVE IT. I BELIEVE WILL SOLVE THE PROBLEM.

Hi there:

DTC P0125 - Insufficient Coolant Temperature For Closed Loop Fuel Control

The simplest thing to do is to reset the code and see if it comes back.
If the code comes back, the problem is likely going to be the result of the above causes (faulty thermostat, faulty ECT sensor, or a low coolant level).


DTC P0135 - Oxygen O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)
or
DTC P0155 - 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)

A code P0135 and P0155 may mean that one or more of the following has happened:

• O2 Heater element resistance is high
• Internal short or open in the heater element
• O2 heater circuit wiring high resistance
• open or short to ground in the wiring harness

In order to solve just...

Repair short or open or high resistance in wiring harness or harness connectors

Replace oxygen sensor (cannot repair open or short that occurs internally to sensor)

Hopoe this helps.

PO141 is an 02 sensor sensor heater circuit malfunction (bank 1 sensor 2)

PO155 is the same for bank 2 sensor 1.
Depending on your mileage, and no wiring problems, you will need to replace the oxygen sensors and clear the codes.

I hope this helps.

There is a fault with the inbuilt heater in the oxygen sensor, before the catalytic converter, on the exhaust pipe the same side of the engine as cylinder 1. The oxygen sensor has four wires within the cable sheath to the top of it. Two of the wires will share the same color. These wires supply power to an internal heating element wire within the sensor. Follow the cable from the oxygen sensor to the connector, you can do a lot testing here. Check the resistance between the two 'same coloured ' wires. The resistance is low, somewhere between 1 and 10 ohms. If there is no continuity (infinite resistance) then this is the fault and the sensor needs to be replaced. The codes: P0030 the oxygen sensor heater relay is at fault P0053 Oxygen heater resistance error P0135 Sensor 1 bank 1 error You are looking at replacement. A further confirmation take the connection from sensor 1 bank 1 and swap it with the sensor 1 bank 2 on the other side of the engine. The codes should 'transfer' and show P0036; P0059 and P0141.

bank 2 is the passenger side of the motor & sensor 1 is the first oxygen sensor closest to the motor.

P0155 is o2 sensor heater circuit malfunction bank 2 sensor 1 it is the o2 sensor circuit in front of the cat converter the o2 sensors are located mounted to the exhaust pipe in front and behind the catylic converter the problem is in the circuit [wiring or sensor itself] check wiring and repair if necessary if the short or open circuit is the sensor need to replace sensor +++ P0161 is 02 sensor heater circuit malfunction BANK 2 SENSOR 2 ++++++ this is the sensor behind the cat converter

po700 is automatic transmission fault detected. poo56 is didnt see .po135 is upstream heated o2sensor heater circuit fault bank 1. po155 upstream heated o2 sensor heater circuit fault bank2.po 161 is downstream heated o2 sensor heater circuit fault bank 2.

Manufacturer Specific Codes

P1100 BARO Sensor Circuit - Read Our Article on Automotive Circuit Testing For Help With This Toyota Check Engine Light Code

P1120 Accelerator Pedal Position Sensor Circuit - Read Our Article on Automotive Circuit Testing For Help With This Toyota Check Engine Light Code

P1121 Accelerator Pedal Position Sensor Range/Performance Problem

P1125 Throttle Control Motor Circuit - Read Our Article on Automotive Circuit Testing For Help With This Toyota Check Engine Light Code

P1126 Magnetic Clutch Circuit

P1127 ETCS Actuator Power Source Circuit

P1128 Throttle Control Motor Lock

P1129 Electric Throttle Control System

P1130 Air/Fuel Sensor Circuit Range/Performance (Bank 1 Sensor 1) - Read Our Article On Oxygen Sensor Codes For Help With This Toyota Check Engine Light Code - More Related Information

P1133 Air/Fuel Sensor Circuit Response (Bank 1 Sensor 1) - Read Our Article On Oxygen Sensor Codes For Help With This Toyota Check Engine Light Code

P1135 Air/Fuel Sensor Heater Circuit Response (Bank 1 Sensor 1) - Read Our Article On Oxygen Sensor Codes For Help With This Toyota Check Engine Light Code - More Related Information

P1150 Air/Fuel Sensor Circuit Range/Performance (Bank 1 Sensor 2)

P1153 Air/Fuel Sensor Circuit Response (Bank 1 Sensor 2) - Read Our Article On Oxygen Sensor Codes For Help With This Toyota Check Engine Light Code

P1155 Air/Fuel Sensor Heater Circuit. (Bank 1 Sensor 2)

P1200 Fuel Pump Relay Circuit

P1300 Igniter Circuit Malfunction - No. 1

P1305 Igniter Circuit Malfunction - No. 2

P1335 No Crankshaft Position Sensor Signal - Engine Running

P1349 VVT System

P1400 Sub-Throttle Position Sensor

P1401 Sub-Throttle Position Sensor Range/Performance Problem

P1405 Turbo Pressure Sensor Circuit

P1406 Turbo Pressure Sensor Range/Performance Problem

P1410 EGR Valve Position Sensor Circuit Malfunction - Read Our Article on EGR Valve Codes For Help With This Toyota Check Engine Light Code

P1411 EGR Valve Position Sensor Circuit Range/Performance - Read Our Article on EGR Valve Codes For Help With This Toyota Check Engine Light Code

P1500 Starter Signal Circuit

P1510 Boost Pressure Control Circuit

P1511 Boost Pressure Low

P1512 Boost Pressure High

P1520 Stop Lamp Switch Signal Malfunction

P1565 Cruise Control Main Switch Circuit

P1600 ECM BATT Malfunction

P1605 Knock Control CPU

P1630 Traction Control System

P1633 ECM

P1652 Idle Air Control Valve Control Circuit

P1656 OCV Circuit

P1658 Wastegate Valve Control Circuit

P1661 EGR Circuit

P1662 EGR Bypass Valve Control Circuit

P1700 Vehicle Speed Sensor '2' Circuit Fault

P1705 Direct Clutch Speed Circuit Fault

P1765 Linear Shift Solenoid Circuit Fault

P1780 Park/Neutral Position Switch Malfunction (Only For A/T)

Back To Top Of Toyota Check Engine Light Codes Page