2004 acura tl without navigation. need reset code. have found a number on glove box door. also pressed 1 and 6 and power button, got two sets of numbers (4 numbers preceeded by a letter). Need to know what number to enter, or how to enter it if not a digit 1 through 6 of preset numbers
The numbers on the radio screen after pressing 1 & 6 are the serial number to retrieve the radio code!
The 4 digit number on the glovebox is probably the radio code, keep pressing preset number 1 until the first number is on the screen, then press preset number 2 until the second number is on the screen, then press preset number 3 until the third number is on the screen, then press preset number 4 until the fourth number is on the screen!
SOURCE: Navigation Code
True. It is in the trunk under the plastic carpet. You need to remove the bolts from the navi dvd and flip it over. Write down the serial number and go back to the dealer. Show registration of car and have car with you. On 2005 and up cars with navi the tech can go to a secret tech screen and get the serial number.
SOURCE: I have a 1999 Acura
Take your registration and title to a dealership and they can look it up for you based on the VIN number of the car. They may charge you up to an hour's labor for doing this though, so make sure they give you the code written down on a card you can keep, and they also show you how to enter it. Otherwise, you'll have to go back and pay again if power is interrupted in the future.
SOURCE: Acura TSX 2005 radio code
I had the same problem when I had my battery replaced.
I guess the mechanic tried to enter the code.... and after 10 tries he failed of course, and the system locked itself and gave the ERROR message.
All you need to do is leave the system on for an hour (Yes, leave it on... meaning you most likely need to drive around for an hour... and sit in the car for an hour doing nothing....)
Then the ERROR message will change back to CODE (you will hear a long beep)
Now you can enter your code. Remember do it slowly. Enter the key 1 by 1...
Do not input quickly, otherwise it will not work
Hope this helps!
SOURCE: Need to reset the code my Acura MDX navigation
check the side of the glove box. my TL has it on the outside side panel as you look from the driver side. my honda prelude had the code there as well. hope this helps
1,890 views
Usually answered in minutes!
×