Power seat my driver seat wont move at all so i want to know what fuse it may be so that i wont be looking like crazy for all of them

unplug it or pull fuse

There is short in the seat motor, or in one of the connections in the seat. You'd have to remove the seat and dissemble to locate the short with a volt meter / continuity tester.

The fuses for the seat are shared with other features on the car such as power antenna. Has any other power feature gone off as well?
Check the runners the seat slides in. There might be something trapped in there blocking the running action.
There are two fuse boxes. One under the hood in the rear drivers side corner, under a black plastic cover. The other is inside the car, inside the end panel of the dash. (With the door open).
Check fuses 1 and 18 as they cover the power seat functions.
https://autobonches.com/amp/fuse-box/2003-ford-explorer-fuse-box-diagram/

It could either be the fuse, the power seat switch, or the motor that moves the seat.

Hi there:
Just two locations there:

Passenger compartment fuse panel
The fuse panel is located on the left hand side of the instrument panel facing the drivers side door.

osition 18 25A - Drivers Unlock Relay, All Unlock Relay, All Lock Relay, Power Seats


Power Distribution box
The power distribution box is located in the engine compartment.

Position 4 30A - Power Windows, Power Moon Roof, Power Seat


Hope this helps, also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Have you checked the fuse? Look in owners manual for the fuse block and see if the fuse is burnt.

i need power seat diagram for mercedez bens

check fuse.if fuse is good check for power at seat motor.if yes replace seat motor.if no check wires at switch.if wires is not loose or broken seat motor switch could be bad.

Seat motor,connector,wiring,fuse and position switch are the only item in the picture here,

I will start with checking the motor connector (NOT AIR BAG) first.

Fuse second and work you way to the switch,

If you are handy you can apply 12V power to the seat and see does it move.

A dirty seat track rail can also cause the fuse to blow,

there is a fuse,check the owners manual for location.