Code p0505 still on after replacing sensor
Code 505 is for a problem with the idle air control valve.
It could be the valve, or a dirty throttle body, or a problem in the harness.
If you replaced the IAC and the throttle body is clean, and the code remains, you probably need to open the harness and check the wires.
SOURCE: 2000 dodge intrepid 3.2 engine light on yesterday, code PO432
this is the code for catalytic convertor efficiency. if you decide to change the 02 sensor change both of the sensors for the left head...there is a good chance the convertor is going bad also depending on the miles
SOURCE: 2000 dodge ram 1500 speed sensor location
Hi my name is Allen!
The sensor you are looking for is located in the rear diff housing, its mounts on top of the housing it is also used for ABS if equipped.
For further asistance you may reach me through FixYa!
SOURCE: code p0138 for the second time
P0138 is code for o2 sensor Bank 1 Sensor 2. This sensor is the one behind the cat on the side of the engine that contains cylinder No 1.
552 views
Usually answered in minutes!
×