My 06 corolla has a hard shift and dtc p2716. The dealer already replaced the ECM and now they want to charge me 600 Bucks for diag on pressure control solenoid (salt valve)
SOURCE: I have a 2006 Toyota
DTC P2716 - Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)
If you need to test this electrical components and wiring. Tell me if you need the TSB about this DTC.
SOURCE: p2716 pressure control solenoid
maybe find one in a junk yard. sorry only way else is to replace the ecm
SOURCE: have code p2716 pressure control d, will need help
Hello.
Before you start looking at replacing solenoids, here is something that you need to know:
Toyota has a technical service bulletin regarding this issue.
Changing the solenoids will NOT rectify your situation. Replacing the ECU in the car is what you need to do. The logic/programming is the problem, not the solenoids.
The good news is this: The ECU is covered, under the factory warranty! It will be replaced for free, if your car has less than 80,000 miles on it.
If you have more miles than 80K, call the Toyota Customer Experience Center at 800-331-4331; an analyst may be able to help offset your costs; they do this quite frequently.
This should get you fixed up. Thanks for visiting FixYa!
385 views
Usually answered in minutes!
×