SOURCE: FAILED EMISSIONS
possible but could be head gasket or valves , or worn rings and is by passing the pistons going straight out the end ...or maby settings are wrong ? try carb cleaner and inspect visually air-filter etc.
SOURCE: 1995 s10 - failing emissions
may need a new catalitic converter. Especially if you have had some noticeable sluggishness from the engine
SOURCE: 1997 chevy s10 zr2 failed emissions
You most likely have a blown Auxilliary Power Outlet fuse. (Happens all the time) The Auxilliary Power Outlet fuse also powers you Data Link Connector (DLC). If the DLC has no power, the computer scanner will not communicate with the engine computer.
Check Fuse #7 (25 Amp) in the instrument panel fuse block. (See diagram)
70 views
Usually answered in minutes!
×