The lumbar adjustment no longer works on the driver's seat
SOURCE: driver's side lumbar support in 05 pacifica seat won't inflate
there is a relay that controls the lumbar its under the seat unbolt seat replace the clicking relay
SOURCE: The Lumbar support adjustment fails
I wonder if you dont have a bad switch. I had a similar problem on my car except that it was the heated seats that would not engage... the power seat buttons all worked just fine. I changed the switch and it fixed the problem...
Note: this was on a BMW not a Murano
SOURCE: Need to replace driver light grey leather power seat - where to go.
I AM NOT GOOD WITH UPHOLSTERY BUT I BUY ON EBAY ONCE IN A WHILE AND I FOUND A GOOD UPHOLSTERY GUY THAT YOU CAN GET THIS SEAT OR JUST THE BOTTOM FROM IF YOU NEED IT .. I HAD HIM DO ME ONE FOR MY LEATHER SUBURBAN AND WOW ITS NICE AND I PUT IT ON EASILY THE HARD PART WAS TAKING THE SEAT OUT THEN FOUND OUT IT WAS A SNAP TO PUT ON .. THE GUYS NAME ON EBAY IS upholsteryguys IF YOU NEED ANY HELP WITH THIS LET ME KNOW YOU WILL BE IMPRESSED WITH HIS WORK.. AS FAR AS THE HEATED SEATS AND THE LUMBAR GOES YOU MIGHT FIND THE PROBLEM WHEN YOU GET IT APPART PUTTING ON THE COVERS .. USUALLY THEY GET BAD CONNECTIONS AFTER A WHILE.. THANKS JERRY AND HOLLER IF YOU NEED MORE.
SOURCE: 2000 GMC Jimmy Power seat stopped working
Left side of the dash, to the right of the IP fuse block. Its a 25 amp circuit breaker, an aluminum cased breaker. CHECK FOR POWER ON THE SEAT SWITCH "A" TERMINAL AND GROUND ON THE "D" TERMINAL. IF YOU HAVE POWER AND GROUND THE SWITCH IS BAD.
Testimonial: "thanks"
335 views
Usually answered in minutes!
×