Question about 2001 Ford Escape
Engine is transverse mounted and need to know cylinder locations in order to troubleshoot occasional misfire code. 2001 Ford Escape 6 cylinder
Here's the scoop. There is a TSB that addresses this issue.
First, replace the spark plugs.
Next, replace all 6 COPS, coil on plug. You have to because they feed back into the PCM, Powertrain Control Module and blow the drivers. Then you need to replace the PCM.
This was for 2004-06, but it might apply to yours if it's a 3.0L.
buy at tascafordparts.com.
Misfire DTC codes identify which cylinder is misfiring.
Misfire Detection Monitor The Misfire Detection Monitor is an on-board strategy designed to monitor engine misfire and identify the specific cylinder in which the misfire has occurred. Misfire is defined as lack of combustion in a cylinder due to absence of spark, poor fuel metering, poor compression, or any other cause. The Misfire Detection Monitor will be enabled only when certain base engine conditions are first satisfied. Input from the ECT or CHT, MAF and CKP sensors is required to enable the monitor. The Misfire Detection Monitor is also performed during on demand self-test.
Upon detection of a Misfire type A (200 revolutions) which would cause catalyst damage, the MIL will blink once per second during the actual misfire, and a DTC will be stored.
Misfire type B:
Upon detection of a Misfire type B (1000 revolutions) which will exceed the emissions threshold or cause a vehicle to fail an inspection and maintenance tailpipe emissions test, the MIL will illuminate and a DTC will be stored.
The DTC associated with multiple cylinder misfire for a Type A or Type B misfire is DTC P0300.
The DTCs associated with an individual cylinder misfire for a Type A or Type B misfire are DTCs P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0309 and P0310.
Posted on Aug 07, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you didn't say which engine so here it is for both
2001 Ford Escape 2WD
2.0 liter DOHC L4 VIN "B"
2001 Ford Escape 2WD
3.0 liter V-6 VIN "1"
Posted on Jul 19, 2009
For the 2003 Mazda MPV 3.0L V6:
Let me know if this helped.....
Posted on May 06, 2010
Tips for a great answer:
The spark plug firing order is ( 1 - 4 - 2 - 5 - 3 - 6 )
The engine cylinders are 1 , 2 , 3 from front to rear on the passenger side of the engine and 4 , 5 , 6 from front to rear on the drivers side of the engine
The coil pack towers are numbered 1 , 2 , 3 from front to rear in the row nearest the passenger side and 5 , 6 , 4 from front to rear in the row nearest the drivers side
hope this clarifies the situation for you
Sep 06, 2012 | 2004 Ford Freestar
Oct 02, 2011 | 2003 Ford Expedition
Sep 24, 2011 | 2003 Ford Escape
Apr 02, 2011 | Ford F-100 Cars & Trucks
Aug 31, 2010 | 2001 Buick Century
Aug 04, 2010 | 2001 Ford Windstar
Apr 06, 2010 | 2001 Ford Escape
Oct 20, 2009 | 2001 Ford Escape
Sep 03, 2014 | 2001 Ford Escape
4,938 people viewed this question
Usually answered in minutes!