Hood stuck, broken latch, cable cord sticking out
I just used a flat head screwdriver and went in through the grill... one opening from top. Vertically placed screwdriver just behind where latch cable enters hood latch. (Looks like a "J" shape metal part). I placed minimal pressure pushing handle toward passenger side and hood released right away. Just did this 5 min ago after interior latch release broke off.
SOURCE: Stuck hood latch on 1996 chrysler concorde- Possible broken cable
take off the left front wheel and fender well. slice off the hood cable insulation get a hook too pull the wire have a buddy pull up on the hood while doing this. Should pop open then hope this helps u out.
SOURCE: I have a 1993 chrysler concorde and the hood
if it broke right after the release handle,you can cut some of the housing plastic away to pull the cable with pliers,
SOURCE: how do i open the hood on a 2000 chrysler concorde
You must go through the front grill. If you cant do that try under the front of the car so you can reach the latch
SOURCE: 2001 PT Cruiser: How too remove crankshaft pulley 2001 PT Cruiser...
GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP
1,129 views
Usually answered in minutes!
×