2003 Ford Ranger Regular Cab Logo
Posted on Dec 17, 2008

2003 ranger.the hood will not open. i think cable is loose /broke

How do i open the hood.i pull on th hood release and it sounds like it does not release the hood will not lift any.

  • 3 more comments 
  • bbwshoes Dec 17, 2008

    I know a bit.When I look at the latches for the hood it appears the cable has came off the latch on the right or back part of the latch connection.The release/lever looks like it will work. its just that the hood will not pop up to use the release.Its as if the inside cab lever pull does not unlock the hood for you to lift it a little and then use the relese lever to do the final release of the hood.

  • bbwshoes Dec 17, 2008

    Wow.I held the latch open with a flashlight wedged up against the brake pedal and then ran around to the front and pushed down on the hood and it raised up enough for me to get a hold of the release latch and the hood opened. that was great ,thank you so much for your assitance in this problem. I would have never thought of that . I recommend this site and bilvg101 for their advice .AAA++++++

  • Anonymous May 11, 2010

    I have been in the collision repair business for over 30 years and I am sure I can help you. If you will tell me everything you have tried and such, my help is free. I have just learned of this site and just want to help



  • Anonymous May 11, 2010

    wow, I wish I could help. If the cable has broken your in a pickle, we have to do this a lot, If you have an understanding of how it works you can get it open. I will try to help, but you have to comunicate what you know about cars in general, and your expertise so I can help you OK?

  • Anonymous Mar 21, 2014

    The hood wont open - the cable seems to have failed. How can I open it?

×

1 Answer

Bill Van Goor

Level 1:

An expert who has achieved level 1.

  • Contributor 2 Answers
  • Posted on Dec 17, 2008
Bill Van Goor
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Oct 29, 2008
Answers
2
Questions
0
Helped
1518
Points
8

You will need 2 people to get the hood open. While you pull on the hood release cable have an assistant gently pound on the center of the hood until it pops up. If this does not work, inspect the hood release lever to see if the pivot broken, if so pull directly on the cable with a pair of locking pliers. After you get the hood open make sure to spray the latch with penetrating oil (WD40)

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How to open the hood when the hood release is not working.

Pull the release and have someone hit the hood with there hand in the middle of the hood, by the latch/front. Then adjust the latch upwards. If the cable is broke then go from the bottom and push the release left or right to release. Follow the cable.
1helpful
1answer

How do i open hood when hood release is broke

Cut the outer sheath around the cable inner core and then use a pair of clamping pliers to pull the core and release the hood latch
0helpful
1answer

How to adjust hood cable for 1999 ford ranger?

The hood cable is not adjustable, you must have a defective cable or the latch is sticking under the hood.
0helpful
1answer

Cannot open hood on 1998 Ford Ranger with cable release inside cab.

You will have to removethe front grill. After you get it off look up to were the release is you should see the cable and were it hooded to you will need to pull to the drivers side on the cable hook up point and this will open it.
2helpful
1answer

Handle inside will not open the hood....

I'm going to tell you how( thinking the handle inside the car broke). This handle is made of plastic(replacement handle is a dealer item, pay to much for it), and the cable behind it usually breaks at the plastic connector. you need a pair of vise grips. attach the vice grips to the cable, and pull. It will release the hood. Now if the cable itself broke going to the hood, you will have to remove the grill( is held in place by screws). Remove the grill, and you will be able to pull the release pin on the hood latch, releasing the hood. hope this helps, and please rate, helpful or not
0helpful
1answer

The hood release handle on my 1998 ford taurus broke now i can not open the hood.

if it broke at handle at dash use pliers and find any exposed cable use pliers if it broke under hood then i reccomend taking it to a shop if you can get latch throught the grill try to pry cable loose ans pull it
1helpful
1answer

The hood release is broken how do I get my hood open

IF HOOD LATCH RELEASE CABLE BROKE AT RELEASE HANDLE YOU CAN TAKE A PAIR NEEDLE NOSE PLIERS PULL THE CABLE ENOUGH TO OPEN HOOD SO YOU CAN REPLACE RELEASE CABLE.
0helpful
1answer

Interior hood release broke out around mounting bolt. Temporary mounted release but still can not release hood. No opening problems until now. How do I get the open?

If just the mounting broke & not the cable also, take a pair of vicegrips or good pliers on visible portion of steel cable & pull inward. If the cable itself is not broken it will pull out enough to open release.
3helpful
2answers

The hood latch cable broke under the hood how can i open it

Saturn Vue hood release can be opened (if the cable is not broken) by disconnecting the cable from the back of the release lever, grabbing the ball on the end of the cable with some large pliers ("channel locks") and pulling hard. A metal "wire keeper" bracket clamped to the cable end under the hood to serve as a spacer and the release lever works.
The purpose of this bulletin is to provide a procedure for opening the hood on the Saturn VUE and ION vehicles should the hood latch release cable mechanism become inoperative.

VUE Hood Opening Procedure Modify the Saturn radio antenna by bending the antenna mast 1 in. (2.54 cm) above the antenna base to a 25 degree angle

Open hood of similar vehicle to locate hood latch release cable to hood latch attachment point.

Using modified antenna, note approximate location that antenna will have to enter in between fascia and hood to access the hood latch cable attachment point. This should be toward the left edge of the Saturn emblem. Also note position of the modified antenna base. It should be angled downward.

Note: Use protective tape on the hood and fascia where the antenna will be inserted to protect the surfaces from scratches
On vehicle with inoperative latch, insert antenna between hood and fascia and depress the hood latch cable until the hood is opened.

Good luck and thank you for using fixya

0helpful
2answers

Hood release broke

you are going to have to either remove the panneling to get at the cable and pull it with vise grip or try to get up inside the hood from the front and release the latch that way . either way is going to be tough to get to.
Not finding what you are looking for?

1,403 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...