Intermittent speedo for 1991 Honda accord but odometer & trip ok

Could be separate cable to odometer?

news doesnt sound good> your instrument cluster will need replaced and the odometer set by the dealer.

Hello,

Were you able to fix your problem? I'm having the same issue with my car, where the Odometer intermittently jumps from 0-48. At times when I start driving the engine stalls and the Odometer starts to act up. The Egine Light is always on. I would appreciate any help.

The gear in the speedometer assembly is broken causing the odometer and trip odometer to be inop. You can either buy a new speedo head or buy a gear kit from an online source (google Ford speedo odometer inop)for the kit.

If your odometer is working but you have no speedo check your connection at the speed sensor first. Is your Check engine light on?
If so check for speed sensor codes. if your odometer & speedo are both out your may be having a problem in your sppedo head which will require repair or replacement.

Try checking the fuses in the inside panel

check your speedo cable it runs from your transmission to the back of your gauge cluster. its probleby broken or disconnected

have the dsme problem. need to chech each of the 3 wires for continuity between the v.s.s. and the e.c.m. if good then the speedo is bad.

Sounds like either your speedometer cable, your nylon gear on the side of the tranny where the cable ties in, or the odometer itself is shot. One of those three will set you straight. If you are able, remove the cluster, take the cable off the back, and pull it out of the sheath. You will see if its broken or not from there. If not, slide it back into the sheath, then you have to find out where the sheath meets the tranny, and pull it off of there. Then, you can get someone else to watch the speedo as you turn the cable from the bottom. If it works, great, if not, then its your cluster/odometer/speedo. If it does work, the small gear in the transmission is shot.

I had the same problem with my 90 daytona. The tach and the speedometer would work intermitantly. I took the whole gauge cluster out, and heated all the soldering with a solder gun to reflow the connections. It seems that this is a common problem with the connections cracking. You may not be able to see the cracks in the solder.