Very cold here in minnesota. last night tried to open my passenger door, got it budged open a little bit but was froze shut. when i came out in the morning my window was making a weird noice so i rolled it down a little bit with the intention of rolling it back up. i pushed the electric button it cluncked down and now wont roll up. the small window on the same side still works fine. All other windows work fine as well. Any help would be greatly appreciated! thanks!
Problem with the window actuator assembly , will need to strip out to see the exact problem
SOURCE: very loud noice in brakes
its possible that one of the caliper piston has seized.
to fix this remove the wheel and take out the pads and try and force the piston back(it takes some elbow grease), then bleed the brake that has seized if this does not work replace the caliper (breakers yard??)
SOURCE: 1998 BMW 528I rear passenger window won't roll back up
You can try a different switch. If both switches have same effect, then the motor is wearing out and will need to be replaced. The door panel will have to be removed to access the motor
SOURCE: My 2005 BMW 530i wont start everything work but it wont turn over
Verify your alarm if you have one.
SOURCE: windows won't roll up after disconnecting battery.
Window circuit fuse blown, check fusebox.
218 views
Usually answered in minutes!
I have the same issue right now (thank goodness for a garage!) I rolled down my passenger side window and it made a big clunk and dropped down a bit. I have a feeling that the window has come off of it's track inside the door frame, but I have no idea how to fix it. I would love to find some sort of guide for taking apart the door and fixing it, but any suggestions would be greatly welcomed.
×