Question about 2000 Nissan Xterra

1 Answer

Knock sensor need replaceing

Where is the knock sensor located on a 2000 extera 5 speed manual trans. 3.3

Posted by on

  • Anonymous Mar 13, 2014

    5.7l knock sensor locator

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

The knock sensor is beneath the manifold. It's a big job worthy of letting a professional take care of it.

Posted on Aug 25, 2012

Ad

5 Suggested Answers

jbass706

Jon Adamson

  • 167 Answers

SOURCE: 95 nissan maxima 3.0. have replaced knock sensor

I would have the charging system checked for over-voltage and AC ripple. There maybe a hidden wire harness problem if the charging system is okay. Wiggle test the wire harness while the engine is running to help locate the problem area. That is way to many parts replaced.

Posted on Oct 28, 2009

Ad

Richard Delahant

  • 1201 Answers

SOURCE: where is knock sensor located on 2002 nissan

You didn't give the size of the engine, this is for the V6 3.3L.
underneath the air intake manifold on top of engine block.

Posted on Mar 14, 2009

HyeProfile

HyeProfile

  • 35 Answers

SOURCE: Trying to replace the knock sensor in my 2000

From the service manual:457bed1.png

Posted on Aug 05, 2009

samtoler

Sam Toler

  • 666 Answers

SOURCE: I need to replace the knock sensor in my 2000

it is located on the bottom section of engine, Just unplug it and it screws out fairly easy

Posted on Jun 14, 2010

Anonymous

  • 1 Answer

SOURCE: Speed sensor location on a Nissan Maxima 2000 GXE...

There are two speed sensors one is called a revolution sensor that is located on the case of the transmission. You can take the driver side wheel off and see the sensor on the top of the case of the transmission. A 10mm bolt is holding it in. Easy fix

Posted on Jun 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will knock sensor cause no start /2000 nissan extera 3.3


Cud dependn on car. But dist may b off timing by a tooth or ign module is worn..also coil n cables old. Speed sensor may bbad or compression. Mite needa scan w factorytool

Jul 02, 2018 | Nissan Cars & Trucks

Tip

General Motors gear ratios hide] 1 GM Rear Wheel Drive...


General Motors gear ratios
hide]

GM Rear Wheel Drive Transmissions

PTU = Power Transfer Unit (Crossover SUV AWD/4WD)

6 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
MNK Allison 1000
MNZ Allison 1000
MW7 Allison 1000
MYB
MYC

5 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M74 Allison 1000
M22 5L50-E
M82 5L40-E
MTW Allison 2400
MX4 Allison 2000
MX5 5L40-E with PTU*
MV3 5L50-E with PTU*

4 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M30 4L60-E
M32 4L60-E HD
M32 4L65-E
M33 4L60-E Hybrid
M41 4L30-E
M70 4L70-E Super Duty
M99 2ML70 2-mode Hybrid*
MD8
ML4 4L30-E
MN8 4L80-E HD
MN8 4L85-E
MT1 4L80-E
MW9 HM 200-4R
  • EVT Mode 1 The 2ML70 can operate in electric mode or non-electric mode in first gear with a gear ratio of infinity to 1.70:1.
  • EVT Mode 2 The 2ML70 operates in non-electric mode with a gear ratio of 1.70 - 0.738:1

3 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M40
M41
M65
MD2
MD3 HM-180
HM-200C
HM-350
HM-400

GM Front Wheel Drive Transaxles

6 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MH2
MH4
MH6 6T75 (AWD)
MH7
MH8
MY9 6T75 (AWD)

5 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
Aisin-AW 55-51LE
M09 Aisin-AW AF33-5
M43 Aisin-AW AF23-5
M45 Aisin-AW AF33-5
M98 AF33-5
MJ7 Honda 5AT
MJ8 Honda 5AT w/PTU*
MLS Aisin 50-40E
MU3 Saab 76.5mm

4 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MLQ Aisin 81-40LE
Aisin ZF 4HP 16
HM 325-4L
Jatco JF405-E
M10 Jatco JF403-E
M13 4T60-E HD
M13 4T60-E
M15 4T65E
M45 Aisin-AW AF33
M57 A245-E
M76 4T65E with PTU*
MD7 4T65E
ME7 4T45-E BAS Hybrid
ME8
ME9
MH1 4T80-E
MN3 4T65E
MN4 4T40/45-E
MN5 4T45-E
MN7 4T65E HD
MS7 A240-E
MU4 A246-E
MU5 U341-F

3 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
M60 GEO Metro
MB3 A131L
MD9
MX1 A131L
GEO Storm
HM-425

GM Manual Transmissions

6 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M10 Tremec 85mm
M12 Tremec T56
ML6 ZF S6-650
ML9 ZF S6-40
MM6 Tremec T56
MV1 Aisin 85mm
MV5 Aisin D173 AY6
MV6 Aisin 85mm
MZ6 Tremec 85mm

5 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M35 Getrag 260
M35 Getrag 260 (2003-2004 Cadillac CTS)
M49 BW 5spd
M50
M59 GEO Tracker
M86 Getrag F23 75mm
M94 Getrag F23
M96 Tremec 109mm
MA5 Aisin AR5 82mm
MG3 Getrag F23
MG5
M50
M51
MH3 Tremec T-5
MK5 C59
ML2 Tremec T-5
ML3 Tremec T-5
MT8
MU3 Saab F25
MW2
MW3 NV4500 109mm
TR-3450
TR-4050
TR-4050
2007 Chevrolet Optra and Spark (Trans code Y4A)
2007 Chevrolet Optra and Spark (Trans code Y4M)

4 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M20 HM-117
M73 Isuzu
MC0 Getrag
MC9
MY6 NP260

More GM Manual Transmissions

6 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
MT2 Opel F40 83mm
MU9 Opel F40 83mm
MTN Toyota C60

5 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
D-16 (2005-2008 Chevrolet Aveo 1.4 DOHC / 1.5L)
D-16 (2005-2008 Chevrolet Aveo 1.4 SOHC)
Y4A (2007 Pontiac Matiz)
YM4 (2005-2007 Chevrolet Aveo)
D-20 (2005-2007 Chevrolet Epica)
L73 Pontiac LeMans F16
M42 Geo Metro
M43 AF23
M49 BW 5spd
M58 Geo Metro
M79 LeMans F13
M86 Getrag F23 (5T45MI)
M94 Getrag F23
M98 Aisin 55-51E
MB4 Geo Prizm 1.8L
MB5 Geo Prizm
MFB 2008 Chevrolet Epica 5-Speed S/R (D24)
MFN 2008 Chevrolet Epica 5-Speed S/R (D33)
MG1 HM-282
MG2 HM-282
MG3 Getrag F23
MJ1 Isuzu
MK7 Isuzu
MLM Y4M (2008 Chevrolet Aveo 1.6 DOHC)
MR3 Isuzu
MU3 Saab F25
MV2 Chevrolet Sprint
MY7 Early J-car

GM Continuously Variable Transaxles

RPO Trans Name Lowest Highest
M83 V20-E
M75 V25-E
M16 V25-E AWD

on Apr 15, 2015 | GMC Cars & Trucks

1 Answer

04 Chevy avalanche knock sensors location


Nathan, 2 Knock's are located under intake manifold.
Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Replace Engine Knock Sensor 2000 06 5 3L Silverado Sierra...

Knock sensor 5 3 4 8 6 0 replacement

05 Chevy Avalanche Knock Sensors

4 8 5 3 6 0 knock sensor replacement GM



Mar 06, 2016 | Cars & Trucks

1 Answer

Location of knock sensor


Not sure on this vehicle.. but check near the crank pulley has to be near there sometimes behind the pulley or behind timing covers depending on the vehicle.

Sep 01, 2015 | Nissan Cars & Trucks

1 Answer

2000 626 2.0 manual trans. what is the difference in a engine that has a auto trans and one that has a manual trans. looking to replace my engine with manual trans but most are for automatic trans and some...


There are many differences, starting with your wiring harness, ecu computer, and it goes on from there.
Manual: There are a set # of gears (usually 4-6) and you switch between them as required.
Automatic: Again a set # of gears (usually 3-5), the transmission switches them automatically, based on current speed and other variables
For an manual you'll need to hook up a tachometer which cues you when the best time to shift is.

Feb 17, 2011 | 2000 Mazda 626

1 Answer

The speedometer is not working and the trans. seems like it's not going into 2nd


computer diagnostic will give you codes to repair vehicle better but sounds like you need to replace Vehicle Speed Sensor (Output Speed Sensor) On a 31TH TRANS sensor located near the transaxle extension housing, on the 41TE trans located between the module and the park/neutral switch (black)

Feb 10, 2010 | 2000 Dodge Caravan

1 Answer

Looking for a diagram of a 2000 caravan transmission so i can locate the speed sensor


The trans speed sensors are on top of the trans.One closest to the engine is the input. One to the right is the output. On your drivers side of van, follow the trans fill tube down to the trans. The input is just under the trans lines going into the trans. output is 8in to the right. Use 1in socket to remove. 20lbs torque to reinstall. Make sure you replace the o-ring on them.

Jan 23, 2010 | 2000 Dodge Caravan

1 Answer

I have a 1996 dodge caravan with the 3 speed transmission and i need to find out the exact location of the input and output speed sensors thanksi


A 3 SPD TRANS DOES NOT HAVE INPUT/OUTPUT SENSORS..ONLY A VEHICLE SPEED SENSOR..IT IS LOCATED ON TRANS EXTENSION HOUSING WHERE RIGHT SIDE AXLE COMES OUT OF TRANS..1 BOLT AND A WIRE CONNECTOR

Jul 18, 2009 | 1996 Dodge Caravan

2 Answers

Where is knock sensor located on 2002 nissan extera


You didn't give the size of the engine, this is for the V6 3.3L.
underneath the air intake manifold on top of engine block.

Mar 14, 2009 | 2002 Nissan Xterra

Not finding what you are looking for?
2000 Nissan Xterra Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...