2003 Ford Mustang Logo

Related Topics:

A
Anonymous Posted on Jul 30, 2012

How do add clutch fluid to a 2003 ford mustang

5 Related Answers

Anonymous

  • 147 Answers
  • Posted on Apr 06, 2009

SOURCE: 2003 ford mustang ac clutch

Ten thousdandenths .0010".

Ad

Anonymous

  • 65 Answers
  • Posted on Jul 07, 2009

SOURCE: A diagram of a 2003 Ford Mustang interior fuse box?

here you go
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

DDS1337

  • 16 Answers
  • Posted on Sep 11, 2009

SOURCE: i have a 2003 ford mustang gt stick shift. clutch sliping

Make sure your master cylinder and slave cylinder are operating. If the clutch hasn't been replaced in a while (or you have been especially hard on the clutch) it could just be worn out.

Anonymous

  • 95 Answers
  • Posted on Sep 21, 2009

SOURCE: refill gear oil in rear differential on 2003 ford mustang gt

The differential will have a plug in the driver's side of the housing that is removed with a 3/8" drive ratchet or square drive. Be sure you know what type of fluid is recommended for your vehicle. It will depend on whether it is a locking differential or standard.

Anonymous

  • 11 Answers
  • Posted on Jan 21, 2010

SOURCE: 2000 ford Mustang clutch

Before attempting any work on your car go and get a Chiltons or Haynes manual (from your local auto parts store) for your year/make/model. It will cover several years and models, but has detailed instructions with photos on how to do just about anything you need to do. Secondly, I suggest you get a buddy to help you. The tranny is heavy in your car, and if not done correctly could put you in the hospital should it land on your head. Replacing the actual clutch really isn't that hard in a Mustang. Its getting the transmission out and back in (probably while the car is on jack stands) that can be hard.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2003 Ford Focus lx and the clutch pedal has no resistance on it and it will not go into gear. Please help I need this car to get to work

Check the clutch fluid level. It will be a small reservoir close to the brake master cylinder. If the clutch reservoir is empty, add fluid.( brake fluid ) You may have to perform a bleed procedure at the clutch slave cylinder attached to the transmission Pump the clutch pedal several times and have someone open the bleeder screw until fluid comes out and the clutch pedal has its resistance back
0helpful
1answer

2003 Mustang 5 speed is screaming, pushing clutch in and out makes it worse

You need to remove the transmission and tre[lace the clutch release bearing.
1helpful
1answer

How often should the automatic transmission fluid fluid be changed in a 2003 Mustang?

Ford calls for every 90,000 miles in the maintenance schedule, as a long time ford dealer tech I think that is to long, for max transmission life do the change every 60,000 miles.
0helpful
1answer

Own a 2003 Mustang Cobra, need to know where to look to be able to adjust the clutch assembly, thanks!

If it's a stock set up you adjust the clutch by lifting the clutch pedal up.
The instructions are in your owners manual or if you don't have it go to this Ford website to view or download it for free.

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
0helpful
1answer

1996 mustang v6 3.8 reverse works fine, but no forward gears. had to add 3 quarts trans fluid. don't see any leaks.

its impossible to lose that much fluid with out a leak. the was so low that it has burned your clutches out. would have to rebuild or replace entire transmission
0helpful
1answer

I have a 1995 ford mustang automatic. I drive the

Check the transmission fluid level and cleanliness.
If it is low, add fluid. If it is dirty or smells burned, take it in to a decent transmission repair shop and be prepared to mortgage your home.
2helpful
2answers

Refill gear oil in rear differential on 2003 ford mustang gt

The differential will have a plug in the driver's side of the housing that is removed with a 3/8" drive ratchet or square drive. Be sure you know what type of fluid is recommended for your vehicle. It will depend on whether it is a locking differential or standard.
0helpful
2answers

I have a 2003 ford mustang gt stick shift. clutch sliping

sounds like you have a worn or misadjusted clutch, but if your clutch is self adjusting meaning a operated with hydraulic pressure (Brake Fluid) then you could have leaking slave cylinder that maybe wetting the clutch disc with brake fluid causing a slippage, or just a worn clutch, in which case you will need to inspect inside bellhousing...
0helpful
1answer

My air condition clutch pulley on my 2003 mustang

You have to get get another compressor.
0helpful
1answer

2003 ford mustang ac clutch

Ten thousdandenths .0010".
Not finding what you are looking for?

874 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...