Mercury villager power steering - 1998 Mercury Villager

SOURCE: key wont turn

try this quick
while trying to turn the key turn the steering wheel back and forth
sometime it binds the key switch
if that doesnt work let me know you have deeper problems
good luck
paul

Michael Grey

• 365 Answers
• Posted on Jun 17, 2009

SOURCE: power steering

You have to bleed the pump and rent a pulley puller but if you are mechanically inclined it should be relatively easy although time consuming.I am attaching a picture

Earl Norager

• 355 Answers
• Posted on Oct 27, 2009

SOURCE: 1993 mercury villager with growling power

WELL YOU COULD PULL THE BELT TO SEE IF IT GOSE AWAY BUT ITS SOUND LIKE THEY DID SOMTHING RONG OR THEY RAN IT LOW OR SOMTHING IS NOT RIGHT WITH NEW PUMP SEAN THIS MANY TIMES IF THERE NOT BLEEDING IT RIGHT YOU CAN DAMAGE THE PUMP RIGHT AWAY SEEN DEARL SHIP GUYS DAMAGE PUMP BUY NOT DOING IT RIGHT AND BE SURE THEY ARE NOT USEING AFTER MARKET STUFF MANY ISUSES WITH THEM THIS CAR IS NOWEN TO HAVE TIE ROD END ISUSES THEY SOUND LIKE GROWLING NOISE HOPE THIS HELPS

Alfredo Mtz

• 102 Answers
• Posted on Nov 10, 2009

SOURCE: power steering pump noise on mercury villager when turning to rig

Had the same problem and the only way to fix it was replacing the steering pump.

SOURCE: 1998 mercury villager van ,

CHECK ALL THE PULLEYS WITH BELT OFF TO SEE IF ANY HAVE PLAY IN BEARINGS
OR ARE CONTAMINATED FROM PREVIOUS BELTS SLIPPING MAKE SURE THEY ALL ROTATE FREELY WITH NO SOUND