Wheel nut torq settings
SOURCE: Does anyone know the torque wrench settings for
Tightening torque for the hub nut is 200Nm and the road wheels are 85Nm
NOTE:
The rear wheel bearings are remowned on these cars for sticking to the
stub axle quite badly, and often have to be forced off using a slide
hammer on the drum, it is quite common to end up damaging the wheel
bearing, so be prepared to replace this as well in this event
SOURCE: cylinder head bolt torqe settings on peugeot 206
bolt length 147mm. stage 1, 15nm, stage 2,50nm, 3 slacken off 360 degree, 4 tighten 20nm,5,285 nm, hope this helps, ive checked this on auto data so settings are correct, do it in 5 stages starting from centre and working in a clockwize direction.
How to change Alternator on Peugeot
http://www.howtorepairguide.com/2012/11/how-to-change-alternator-on-peugeot.html
----------
These will help.
Thanks.
89 views
Usually answered in minutes!
×