2008 chevy uplander

Question 1

0helpful

1answer

2008 uplander ABS warning messages

Check your wheel speed sensors for proper operation and for metallic debris, make sure your reluctor ring is in working order and not damaged, if all that appears to be in order, then check it with a diagnostic computer. usually it is a failed WSS (wheel speed sensor) if it is part of a wheel bearing assembly then it is possible you have a failed or failing wheel bearing

Aug 20, 2019 • 2008 Chevrolet Uplander

0helpful

1answer

My abs, stability and traction control light came on. When I turned my car off a motor under the hood close to the windshield on the drivers side stayed on. Is it the ABS control module

That's where the ABS pump is, so yes. Get the trouble codes read before you replace anything

May 21, 2018 • 2008 Chevrolet Uplander

0helpful

1answer

I have a 2008 chevy uplander. When driving the traction control engages at 30 mph. Under that its ok. Can turn the traction control off but that doesnt solve the problem. Any answers?

check abs system --speed sensor -brakes possible caliper dragging -or hub worn or damaged

Aug 26, 2015 • Cars & Trucks

0helpful

1answer

2005 chevy uplander

there is no c0400 there is a c0040 left front wheel speed check the wiring at the speed sensor about 3 to 6 inches from the conector on the body harness for a brake in the wirring

Apr 01, 2014 • Chevrolet Uplander Cars & Trucks

3helpful

3answers

2008 Suzuki XL7, Service Stability Control, Service Traction Control, Brake dashboard lights on

So the equinox is the same as a 2008 Suzuki XL7?????

Oct 29, 2012 • 2008 Suzuki XL7

3helpful

1answer

My traction control and stability system light has come on and now my front end feels unstable. What could be the issue? Is it going to be a costly fix or something I can do with the assistance of...

I had the light come on and it turned out to be the abs wiring harnes to the rear wheel had been damaged by a rock. Resodered the wire and the light went out and the traction control system works again.

Aug 09, 2011 • 2008 Chevrolet Uplander

8helpful

1answer

My stability system and traction control messages are flashing and my ABS light is on for my 2008 Uplander. Any suggestions why are 3 are going on?

Hello Tip.

All three systems rely on some of the same sensors in order to operate.
In this case most likely is wheel speed sensors. By far the most common problem.
The system will need to be scanned to find out which is the offending one and be repaired.
Not all scan tools have the capability to read ABS systems. Make sure whoever you take it to has this available. Most good shops will have this.
If you have further questions on this, please ask me here, be glad to help.
Thank you for using FixYa.

KL

Jan 17, 2011 • 2008 Chevrolet Uplander

0helpful

1answer

2008 Chevrolet Uplander. The car activates abs for no reason and records c0196 trouble code in the abs module.

• An internal fault within the yaw rate sensor/lateral accelerometer, P/N 15189628, may be the first possible cause. • The vehicle stability enhancement system (VSES) electronic brake traction control module See if this info helps

Feb 05, 2010 • 2008 Chevrolet Uplander

1helpful

1answer

My compressor quit working on my 2006 chevy uplander but before i replace the compressor its self is there something simple i can check first also, on my info center the abs, traction control, &...

Anything a/c related is best left to a mechanic. You prob have a freon leak somewhere. Try adding a can or 2 to see if that works.
As far as the other lights, they prob just need their recommended servicing.

Feb 03, 2010 • 2006 Chevrolet Uplander

1helpful

1answer

The service stability light is on

It pertains to just what it says STABILITY. Your vehicle has a system that will sense if you are coming around a curve at about 90 MPH. It will automatically apply a light amount of braking to the proper wheels, thus hopefully eliminating you and your Uplander from flying off curve. With the light on as with any warning light , you must assume whether its real or not, that the STABILITY system IS NOT operating. Significant computer / sensor diagnosis will be necessary. Hope this helps

Apr 12, 2009 • 2008 Chevrolet Uplander

Question 2

Stephen

Cars & Trucks Master 21,873 Answers
Posted on Jul 25, 2012

Stephen

Cars & Trucks Master

Joined: Jun 22, 2012

Answers

21873

Questions

0

Helped

6208979

Points

67230

You should have the body computer scanned for trouble codes. A basic code reader may not access the body computer.

Answer 2 · 1/17/2011 12:00:00 AM

Anonymous

1168 Answers
Posted on Jan 17, 2011

SOURCE: My stability system and traction

Hello Tip.

All three systems rely on some of the same sensors in order to operate.
In this case most likely is wheel speed sensors. By far the most common problem.
The system will need to be scanned to find out which is the offending one and be repaired.
Not all scan tools have the capability to read ABS systems. Make sure whoever you take it to has this available. Most good shops will have this.
If you have further questions on this, please ask me here, be glad to help.
Thank you for using FixYa.

KL

Answer 3 · 1/17/2011 12:00:00 AM

Anonymous

1168 Answers
Posted on Jan 17, 2011

SOURCE: My stability system and traction

Hello Tip.

All three systems rely on some of the same sensors in order to operate.
In this case most likely is wheel speed sensors. By far the most common problem.
The system will need to be scanned to find out which is the offending one and be repaired.
Not all scan tools have the capability to read ABS systems. Make sure whoever you take it to has this available. Most good shops will have this.
If you have further questions on this, please ask me here, be glad to help.
Thank you for using FixYa.

KL

Related Topics:

Trustworthy Expert Solutions

2008 chevy uplander

1 Answer

Stephen

1 Related Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

2008 uplander ABS warning messages

My abs, stability and traction control light came on. When I turned my car off a motor under the hood close to the windshield on the drivers side stayed on. Is it the ABS control module

I have a 2008 chevy uplander. When driving the traction control engages at 30 mph. Under that its ok. Can turn the traction control off but that doesnt solve the problem. Any answers?

2005 chevy uplander

2008 Suzuki XL7, Service Stability Control, Service Traction Control, Brake dashboard lights on

My traction control and stability system light has come on and now my front end feels unstable. What could be the issue? Is it going to be a costly fix or something I can do with the assistance of...

My stability system and traction control messages are flashing and my ABS light is on for my 2008 Uplander. Any suggestions why are 3 are going on?

2008 Chevrolet Uplander. The car activates abs for no reason and records c0196 trouble code in the abs module.

My compressor quit working on my 2006 chevy uplander but before i replace the compressor its self is there something simple i can check first also, on my info center the abs, traction control, &...

The service stability light is on

Not finding what you are looking for?

Cars & Trucks

2008 uplander ABS warning messages

Ask a Question

Check Out the Latest Top Trucks Report!

Top Cars & Trucks Experts

ZJ Limited

john h

Arnie Burke

Are you a Car and Truck Expert? Answer questions, earn points and help others

Manuals & User Guides

DIS9_Full.pdf. user-manual-1994...

DIS9_Full.pdf. user-manual-1994...

Rhonda_Docs.pdf. user-manual-2001...

Related Topics:

Trustworthy Expert Solutions

2008 chevy uplander

1 Answer

Stephen

1 Related Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

2008 uplander ABS warning messages

My abs, stability and traction control light came on. When I turned my car off a motor under the hood close to the windshield on the drivers side stayed on. Is it the ABS control module

I have a 2008 chevy uplander. When driving the traction control engages at 30 mph. Under that its ok. Can turn the traction control off but that doesnt solve the problem. Any answers?

2005 chevy uplander

2008 Suzuki XL7, Service Stability Control, Service Traction Control, Brake dashboard lights on

My traction control and stability system light has come on and now my front end feels unstable. What could be the issue? Is it going to be a costly fix or something I can do with the assistance of...

My stability system and traction control messages are flashing and my ABS light is on for my 2008 Uplander. Any suggestions why are 3 are going on?

2008 Chevrolet Uplander. The car activates abs for no reason and records c0196 trouble code in the abs module.

My compressor quit working on my 2006 chevy uplander but before i replace the compressor its self is there something simple i can check first also, on my info center the abs, traction control, &...

The service stability light is on

Not finding what you are looking for?

Cars & Trucks

2008 uplander ABS warning messages

Ask a Question

Popular Questions

Toyota dashboard CD player won't eject

4.3 Firing order diagram for 4.3L v6 Chevy engine

BMW X5 Trans Fail Safe Program,

Diagram of 1996 ford ranger fusebox which fuse is

What does my check engine light trouble code $7e8 mean?

Check Out the Latest Top Trucks Report!

Top Cars & Trucks Experts

ZJ Limited

john h

Arnie Burke

Are you a Car and Truck Expert? Answer questions, earn points and help others

Manuals & User Guides

DIS9_Full.pdf. user-manual-1994...

DIS9_Full.pdf. user-manual-1994...

Rhonda_Docs.pdf. user-manual-2001...