2000 Chevrolet Malibu Logo

Related Topics:

Posted on Jul 24, 2012

How do I remove the oil pan from a 2001 Chevy Malibu 3.1 v6?

I am unable to determine what needs to be done in order to remove the oil pan. Please help!!

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 13, 2009

SOURCE: firing order for 2001 chevy malibu

try going on to auto zone .com and then go to view repair guide for the firing order

Ad

Anonymous

  • 4669 Answers
  • Posted on Mar 01, 2009

SOURCE: need firing order for a 1998 chevy malibu 3100 v6

The Firing order is 1-2-3-4-5-6. But the wires go on the coils in this order1-4-6-3-2-5

Anonymous

  • 135 Answers
  • Posted on Jun 30, 2009

SOURCE: i am replacing the oil pump on a 98 chevy malibu,

take loose the motor mount bolt and jack the front of the engine up to clear the oil pump and remove the pan,.the bolt the runs thru the center of the mounts ,the easiest way ,hope this helps you, thanks robert b.

chitownbob45

chitownbob45

  • 316 Answers
  • Posted on Oct 04, 2009

SOURCE: ho do you remove oil pan on 1998 chevy malibu 3.1

take out the oil pan bolts and take it out might have to undue motor mounts and jack up engine to get pan out.

Anonymous

  • 5 Answers
  • Posted on Jan 05, 2010

SOURCE: need location of fuel filter on 2001 chevy malibu, 3.1 v6

underneath car driver side

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I remove oil pan on a 2001 gmc Sonoma pick up truck to replace gasket

1993 GMC SONOMA 2.6 CYL V6 NOT 4x4 OIL PAN ...

? 2:31
https://www.youtube.com/watch?v=1KsRTlnW7Cg
Sep 27, 2011 - Uploaded by JohnSmiths8379858
trying to reomove the oil pan to this truck has been sitting for about 6 ... 1993 GMC SONOMA 2.6 CYL V6 NOT 4x4 OIL PAN REMOVAL "HELP!

Oil Pan Gasket: How to Change Oil Pan Gasket for 2001 ...

www.2carpros.com/questions/2001-gmc-sonoma-oil-pan-gasket
Mar 18, 2011 - How to change oil pan gasket for 2001 sonoma, can i get away with just raising the engine two inches to ... 2001 GMC Sonoma • 4 cylinder 2WD Automatic • 150,000 miles ... You need to remove the engine to get the sump off.
0helpful
1answer

Do I need to remove the engine from my 2001 4.3 V6 blazer in order to get the oil pan off?

Two ways no need to pull engine
One lets start with cherry picker engine hoist unbolt mounts slide bolts
Lift to desired height of two inches 4x4 accross inner tire wells now chain down to 4x4 pull pan off 10 minutes done
The other way is mobile home jack stands under motor mounts and mounted 4x4 at top chained down never on the front clip but on inner tire well
They make a specific engine lift on wheel wells for this your not lifting engine high enough but enough to get the pan off safely
0helpful
1answer

How to drain and fill transmission fluid in chevy malibu 2012??

mostly to drain transmission oil it is necessary to remove the pan. At 72000miles I suggest that you have an accredited transmission shop do the job as it will be due for a band and clutch pack adjustment and filter clean and general service and this can all be done while the pan is off.
0helpful
1answer

3100 sfi v6 firing order and diagram

I got a 2001 chevy malibu v6 3100 sfi.I just got this car Wednesday one of the coil packs are in the rong spot they got it 3 6 5 2 4 1 should be I think 5 2 6 3 4 1 and they have it wired 1 5 3 6 4 2 what is the order it goes 1 4 6 3 2 5 can someone please help me
1helpful
1answer

What is the torque suppossed to be on the motor mounts and the starter mounting bolts on a 2001 chevy malibu V6

Main cap bolt, 396-454 4-bolt (inner/outer) 110 ft.-lbs. 3/8 in. connecting rod bolt 50 ft.-lbs. 7/16 in. connecting rod bolt 67-73 ft.-lbs. Cylinder head bolts, long 75 ft.-lbs. Cylinder head bolts, short 65-68 ft.-lbs. Screw-in rocker arm studs 50 ft.-lbs. Intake manifold bolts (cast iron head) 25 ft.-lbs. Oil pump bolt 65 ft.-lbs. Cam sprocket bolts 20 ft.-lbs. motor mounts 85 ft.-lbs. Flywheel/flex plate bolts 60 ft.-lbs. Pressure plate bolts 35 ft.-lbs. Bell housing bolts 25 ft.-lbs. Exhaust manifold bolts 20 ft.-lbs.
3helpful
1answer

The firing order diagram for a 2001 chevy Malibu posted by Perkins48 shows block one as #2 and # 5 and the post by Audie61 shows block one as #5 and # 2

if this is for the v6 engine this is the proper firing order.1-3-5 are in back by firewall, 2-4-6 are in front, the coils from left to right are 5-2, 3-6, 4-1, hope this helps. good-day !
0helpful
1answer

I need to know the push rod order for a 2001 Chevy malibu V6

look at the order of the rockers arm stands. the rocker arms itself. some are higher. the longer rods go to these arms. the shorter one go to the lower arms.
14helpful
1answer

Whats the firing order for a 2002 Chevy Malibu

For the 2002 Chevy Malibu 3.1L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
_______________
|....1.....3......5....|
_______________
|....2.....4......6....|

Ignition Coil Connections:

.|.5..2.|..|.3..6.|..|.4..1.|

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

1helpful
1answer

HOW TO PUT A OIL PAN GASKET ON A 2001 CHEVY MALIBU?

pull the vehicle on ramps or put on jack stands. set the emergency brake pull off flywheel cover if there is one remove all the bolts from pan and drop it down might catch on oil pump. pull off old gasket and replace with new one
1helpful
1answer

Firing order for 2001 chevy malibu

try going on to auto zone .com and then go to view repair guide for the firing order
Not finding what you are looking for?

511 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...