I have been driving my car for the past two weeks and sometimes the brake needs to be pressed all the way down to the floor to stop and sometimes the brake stops with a light touch. I have been noticing a thumping sound when braking and smelled something burning. Yesterday when I tried to park the Yukon in my driveway it stopped without me even hitting the brakes. Today I drove it and smoke was coming from all four tires. feels as if I am driving with the emergency brake on. Help!
SOURCE: 2002 YUKON XL Denali no brake lights or cruise
FROM LUSTY KID:
Check your bulbs first, I have lost both headlights on my ford at once on account of the bulbs burning out at the same time. Same thing probably happen, you have one filament out. The lights can work, but if the filament for brake is burnt, you don't see brake lights.
As for the cruise control. Check fuse box first. If OK check vacuum hose to actuator in engine compartment for starters.
Advise:
SOURCE: 03 Yukon denali park brake warning wont turn off
hi for info the brakes warning light on dash is also an indication that brake fluid level is low? or there may be a leak resulting in fluid level drop ? also considering age of car you may need to inspect brake pads wear ? if your car has low brake pads wear indicators attached to pads ? or the hand brake switch req's checking to ensure it is being pushed to off position when h/brak is down ? so fluid level low is the obviouse 1st check as fluid will displace from reservoir as pads wear low hence the level indicator on fill cap trips on may i suggest if it is low level b4 you top up? check your b/pads if you have not done so recently? or replaced since new ? hope this helps you locate problem best wishes from the uk
SOURCE: Can't get rear parking brake off 04 Yukon Denali XL
You are going to have to pry it over the axle on one side of the park brake shoe assembly with either a pry bar or screwdriver. then just pop the new one back over the axle in the same way. Hope this helps
SOURCE: gmc yukon has the abs & parking brake light
you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem
105 views
Usually answered in minutes!
×