!st check and make sure the water is flowing in the radiator, then check
the timeing, Mazda will run hot if the timeing is rong.
If your engine is overheating, Try this procedure:
SOURCE: 1988 mazda b2200 a little hose is leaking from the
This is going to be a thermostat bypass gose, which allows some coolant to bypass the thermostat while the engine is coming up to temperature.
SOURCE: 1999 Protege overheating. Changed thermostat,
if your vehicle has electric cooling fans it could be that they are not working,if this is the case when you are on the freeway you don't need the cooling fans you only need them when the vehicle is not moving as there is no air going through the radiator to keep the engine cool......hope this helps......cheers.
SOURCE: My Mazda MPV 1995 is
Nornally the hose will warm up but not hot with a circulating system. the therostae could be installed upside down or be bad. You should install a therostate with a asprin holding it open to circulate the coolant till the cooling system is full and the asprim will disolve as it soaks in the coolant. the air will ciculatre to the top and out and the systrem will be full. the stat will work corectly after the asprim is gone. with air around the stast it might not open and therefore overheat.
1,418 views
Usually answered in minutes!
×